Specifications

Installation and Upgrading
25
NetLinx Integrated Controllers
6. Insert the upgrade card into the connector opening with the arrow facing towards the pins, then
push it in firmly until the contact pins are completely inside the flash card and securely
attached to the connector (FIG. 18).
FIG. 17 Location of the Compact Flash within a sample Integrated Controller
FIG. 18 Removing the Compact Flash card
Compact Flash
Mounting
Brackets
Compact Flash
insert location
NXC Card Slots
NXC Card Slot
faceplate
Chassis housing screws (top)
- 6 on top
- sides vary per model
Chassis housing screws (side)
- 4 on each side of the NI-4100
- 3 on each side of the
NI-3100/2100
Under-side groove
located below
Insert with arrow
facing towards
the connector pins
Card Removal Grooves