Specifications

Installation and Upgrading
22
NetLinx Integrated Controllers
6. On the main board, locate both the ICSNet card’s counterpart connector and standoff
installation holes. These standoffs are located just under the main board cutout used for the
card’s RJ-45 connectors (FIG. 14).
7. Take the ICSNet card and prepare it for connection by:
 Aligning its three pre-installed plastic standoffs (FIG. 15) to their three corresponding
standoff installation openings on the main board (FIG. 14).
 Aligning the card’s three ICSNet connectors through the three openings on the chassis
made by the removal of the connector plate (step 3).
 Aligning the connector on the ICSNet card (FIG. 15) with its main board counterpart
(FIG. 14).
FIG. 13 ICSNet cover plate location
FIG. 14 Main board ICSNet card connection locations
Removable
ICSNet cover plate
Push out
Main board
connector
Standoff installation
openings (3)
for the card