Specifications

Introduction

NetLinx Integrated Controllers

NI-4100 Specifications

The NI-4100 unit (FIG. 5) is geared toward those advanced control and automation requirements

associated with most complex commercial and residential installations. The NI-4100 provides

support for up to 4 NetLinx control cards (such as NXC-COM2, NXC-IRS4, etc.),

7 RS-232/RS-422/RS-485 Ports, 8 IR/Serial Output ports, 8 Digital Input/Output ports, and

8 Relays. The NI-4100’s on-board Master also provides the ability to update installed control card

firmware.

NI-3100 Specifications (Cont.)

Included Accessories: • 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)

• 4-pin 3.5 mm mini-Phoenix (female) AXlink connector (41-5047)

• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)

• Installation Kit (KA2105-01):

8-pin Relay Common Strip

Four rack mount screws

Four washers

• NI-3100 Quick Start Guide

• Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)

• Two CC-NIRC IR Emitters

• Two removable rack ears (62-2105-07)

Other AMX Equipment: • 2-pin 3.5 mm mini-Phoenix male connector (41-5026)

• CC-NIRC IR cables (FG10-000-11)

• CC-NSER IR/Serial cables (FG10-007-10)

• CSB Cable Support Bracket (FG517)

• ICSNet daughter card (FG2105-10)

• NCK, NetLinx Connector Kit (FG2902)

• STS, Serial To Screw Terminal (FG959)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CF2NI256M - 256 MB compact flash card (FG2116-47)

NXA-CF2NI512M - 512 MB compact flash card (FG2116-48)

NXA-CF2NI1G - 1 GB compact flash card (FG2116-49)

FIG. 5 NI-4100 NetLinx Integrated Controller (front view)