Specifications

Programming
162
NetLinx Integrated Controllers
Program Port Commands (Cont.)
Command Description
DISK FREE
Displays the total bytes of free space available on the Master.
Example:
>DISK FREE
The disk has 2441216 bytes of free space.
DNS LIST <D:P:S>
Displays:
• Domain suffix·
• Configured DNS IP Information
Example:
>DNS LIST [0:1:0]
Domain suffix:amx.com
The following DNS IPs are configured
Entry 1-192.168.20.5
Entry 2-12.18.110.8
Entry 3-12.18.110.7
ECHO OFF
Disables terminal character's echo (display) function.
ECHO ON
Enables terminal character's echo (display) function.
GET DEVICE HOLDOFF
Displays the state of the device holdoff setting in the Master.
Example:
>GET DEVICE HOLDOFF
Device Holdoff is off.
This command reveals the state of the device holdoff set using the
DEVICE HOLDOFF ON|OFF command.
GET IP <D:P:S>
Displays the Master's D:P:S, Host Name, Type (DHCP or Static), IP
Address, Subnet Mask, Gateway IP, and MAC Address.
Example:
>GET IP [0:1:50]
IP Settings for 0:1:50
HostName MLK_INSTRUCTOR
Type DHCP
IP Address 192.168.21.101
Subnet Mask 255.255.255.0
Gateway IP 192.168.21.2
MAC Address 00:60:9f:90:0d:39
HELP SECURITY
Displays the related security commands:
Example:
>HELP SECURITY
>logout Logout and close secure session
>setup security Access the security setup menus
IP STATUS
Provides information about the current NetLinx IP Connections:
Example:
>IP STATUS
NetLinx IP Connections
No active IP connections
MEM
Displays the largest free block of the Master’s memory.
Example:
>MEM
The largest free block of memory is 11442776 bytes.
MSG ON or MSG OFF
MSG On sets the terminal program to display all messages generated by
the Master. MSG OFF disables the display.
Example:
> MSG ON
Extended diagnostic information messages turned on.
> MSG OFF
Extended diagnostic information messages turned off.