Specifications

NetLinx Security within the Web Server
126
NetLinx Security - Web Server
Mousing-over a listed module entry presents a popup which displays the properties associated with
the selected module.
By selecting the module and clicking the Save button, the administrator can assign a Duet module
to be associated with the physical device.
Clicking the Cancel button aborts the association of a Duet module with the physical device BUT it
does not undo the process of pulling new modules from the Internet/device into the /unbound
directory on the target Master. These modules will remain resident in the /unbound directory until
they are manually deleted via the Manage Other Devices main web page. Refer to the System
Settings - Manage Other Devices - Dynamic Device Discovery Pages section on page 116.
Manage Other Devices Menu - Creating a new User-Defined Device
This page provides the ability to both add and remove any user-defined devices. Existing
user-defined devices are listed at the bottom of the display along with a corresponding Remove
button alongside each new entry. Although FIG. 85 shows a populated page, by default, all fields
are blank and no devices are pre-populated.
1. Click on the Create User Defined Device button (from within the Manage Other Device
page).
2. Begin by entering the address of the physical device within the Address field. This information
can be either the NetLinx Master port value (D:P:S) or an IP Address (#.#.#.#).
3. From within the Device Category field, use the drop-down list to select the control method
associated with the physical target device (IR, IP, Serial, Relay, Other).
4. From within the SDK Class field, use the drop-down list to select the closest Device SDK class
type match for the physical target device. The following table provides a listing of the available
choices.
FIG. 84 Select Device Module page
Module Properties
(displayed via a
mouse-over
popup dialog)
This action will NOT affect any currently running Duet module associated with the
physical device. The module is associated with the device upon reboot.