Specifications

NetLinx Security within the Web Server
115
NetLinx Security - Web Server
- Once this button is pressed, the device then shows up as Bound (within the
Status column).
Manage NetLinx Devices - Obtaining NetLinx Device information
To obtain more description than is provided by the listing:
1. Use your mouse to hover the cursor over a particular device within the listing and display a
mouse-over popup dialog (FIG. 76).
 The previous popup dialog shows the Master’s IP settings including the IP Address, ICSP
Port, and a MAC Address.
 If the device is one that is bound to a Master, the popup also displays an additional Master
MAC Address field, which should match the MAC Address information for the bound
target Master (FIG. 77). Notice that the Master MAC Address in FIG. 77 should
match the MAC Address of the Master in FIG. 76.
 In the above example, the moused-over device is bound to an NI Master on System 1
running firmware v3.01.320. The device’s popup shows the MAC Address of the Master
with which it is bound (00:90:9f:90.....).
 If this device is ever unbound from this Master (using the Unbind button), its Master
MAC Address would be left blank.
FIG. 76 Manage NetLinx Devices page - showing a sample mouse-over popup dialog
FIG. 77 Manage NetLinx Devices page - showing a sample mouse-over popup dialog
NetLinx Master’s associated
property information
(displayed via a mouse-over
popup dialog)
This field illustrates the MAC Address
of the Master.
NDP device’s associated
property information
(displayed via a mouse-over
popup dialog)
This field illustrates the MAC Address
of the Master bound to this device