Specifications

NetLinx Security within the Web Server
107
NetLinx Security - Web Server
4. Enter a new or updated name within the Host Name field. This entry can be 1 - 50
alphanumeric characters in length.
5. Select either the DHCP or Specify and IP Address checkbox to chose the source of the IP
Address information being used within the remaining fields.
6. Enter or change any IP Address or DNS Address information within the remaining fields.
7. Click Update to save any changes. If your changes are successfully updated to the Master, the
following message appears. "Network Settings updated. Device must be rebooted for the
setting to take effect".
8. Return to the System menu by clicking on the purple System icon from within the Online Tree,
click the Reboot button, and then allow the Master a short time to reboot itself.
9. Click on the Refresh macro from the browser’s menu bar. If no security is currently enabled on
the target Master, you are directed back to the Manage WebControl Connections page. If
security is enabled, you are directed to the initial Username/Password page to enter your access
information.
Device Menu - Developing a URL List
1. Click the System Settings > Manage System link from within the System Settings section of
the Navigation frame.
2. Click on a violet Device icon from within the Online Tree to open the Device menu buttons
within the right frame.
3. Click the URL List button to open the URL List dialog (FIG. 68). This dialog allows the user
to view, add, and remove URLs from the specified devices URL list.
4. Add a new URL to the list be pressing the New button which opens the Add New URL dialog.
5. Enter either an IP Address or a resolvable name (ex: www.amx.com) into the URL field.
6. Enter the Port number used to connect to the other device within the Port field. The default port
provided in 1319, which is used for ICSP communication. Refer to the Manage System -
Server section on page 94 for more information on the default Ports used for communication.
Network Settings Dialog
Feature Description
IP Address:
Host Name Use this field to view/edit the target Master's current Host Name.
DHCP/Specify IP Address Use these radio buttons to specify an address for the target Master:
• DHCP - obtained from a DHCP Server.
• Specify an IP Address - typically obtained from a System Administrator.
IP Address Use this field to view/edit the target Master's current IP Address.
Subnet Mask Use this field to view/edit the target Master's current Subnet Mask assignment.
Gateway Use this field to view/edit the target Master's current Gateway assignment.
DNS Address:
Domain Suffix Use this field to view/edit the target Master's current Domain Suffix.
DNS IP #1, #2, #3 Use these fields to view/edit the target Master's current DNS IP addresses.