Specifications

Configuration
9
NXB-KNX NetLinx KNX Interface
Port Settings
Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 7). Use the options
on the page to specify various Port settings for this NXB-KNX unit.
The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP
ports, and allow you to change each port number from it’s standard default assignment.
Domain Suffix: Enter the Domain Suffix for this unit.
DNS 1, 2, 3: Enter up to three DNS addresses for this unit.
Reboot: Click to initiate a system reboot. IP Settings changes only take effect after a
reboot.
FIG. 7
Port Settings page
HTTP Port Number: Default = enabled, default port number = 80.
HTTPS Port Number: Default = enabled, default port number = 443.
Telnet Port Number: Default = enabled, default port number = 23.
SSH Port Number: Default = enabled, default port number = 22.
FTP Port Number: Default = enabled, default port number = 21.
Restore Factory Defaults: Click to restore all Port settings to the factory defaults.
Reboot: Click to initiate a system reboot. Port changes only take effect after a
reboot.