Specifications

Configuration
7
NXB-KNX NetLinx KNX Interface
Security Settings
Select Security Settings from the Admin drop-down menu to open the Security Settings page (FIG. 4). Use
the options on the page to specify security options and login information for this NXB-KNX unit.
Enable / Disable Security Settings
Login Information
Use this set of options to specify a Username and Password. These will be required only if one or more of the
Security Settings are enabled.
FIG. 4 Security Settings page
Web Security: Click this checkbox to enable Web Security.
When Web security is enabled, a username and password are
required to access any system Web pages (default = disabled).
Telnet Security: Click this checkbox to enable Telnet Security.
With Telnet Security enabled, a username and password are
required to establish a Telnet or SSH connection (default = disabled).
Admin Security: Click this checkbox to enable Admin Security.
With Admin Security enabled, a username and password are
required to modify any system configuration item (default =
disabled).
Restore Factory Defaults: Click to restore all security settings to their factory default
(all disabled).
Username: Enter the Username that will be required to login to this unit if
security is enabled. The default Username is "administrator".
New Password: Enter a new password that will be required to login to this unit if
security is enabled. The default Password is "password".
Confirm Password: Re-enter the new password in this field.
Restore Factory Defaults: Click to restore the login information to the factory defaults:
• Default Username = administrator
• Default Password = password