Instruction manual

NetLinx Firmware Upgrades
43
NXB-KNX KNX Communications Gateway
The selected directory path is displayed in the Send To NetLinx Device dialog (Location text box).
Assuming that the specified target directory contains one or more KIT files, the KIT files in the selected
directory are displayed in the Files list box, with the file's last modified date and time (FIG. 32).
3. Select the appropriate *.KIT file from the Files list.
4. Enter the Device and System ID numbers for the NXB-KNX in the Device and System text boxes.
By default, the Device Number assigned to the NXB-KNX is 0.
Use the Online Device Tree to determine the device's assigned ID, if it has been changed.
5. Review the File, Connection, Address, and Target Device information before you send.
6. Click the Send button. You can watch the progress of the transfer in the Send to NetLinx Device dialog.
NetLinx Studio transfers the files to the NXB-KNX and then tells it to reboot. After it reboots, the NXB-KNX
actually goes through the upgrade process.
During the upgrade process, the Status LED blinks, and the NXB-KNX stays offline.
Once the upgrade is complete, the LED will stop blinking and the NXB-KNX will come online.
FIG. 31 Browse For Folder dialog (NetLinx Studio)
FIG. 32 Send To NetLinx Device dialog (NetLinx Studio)
5600