Instruction manual

Configuration
14
NXB-KNX KNX Communications Gateway
Select NIST Servers from the Clock Manager sub-menu (or from the main Clock Manager page), and the NIST Server
Manager page will be displayed (FIG. 20):
Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).
The options on this page allow you to select the NIST server that will be queried at each clock synchronization, and
allow you to add more NIST servers to the list.
To add a NIST server, enter the NIST Server Name, IP Address and Location in the fields provided.
To remove a NIST server from the list, click the Remove button.
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
FIG. 20 Clock Manager - NIST Server Manager page
Only one NIST server is selectable at any given time.