Instruction manual

Configuration
8
NXB-KNX KNX Communications Gateway
1. Enter a Device Number for this NXB-KNX unit in the Device Number text field.
2. Click Accept to save your changes.
3. Press Reboot to reboot the NXB-KNX and apply the new Device Number assignment.
Master Connection tab
The options in the Master Connection tab allow you to view and edit connection details for the NetLinx Master to which
this NXB-KNX unit will be connected (FIG. 11). Note that the Master Connection options can also be accessed directly
from the Admin Menu (select Master Connection).
To establish communication between the NXB-KNX and a specific NetLinx Master:
1. Enter the Master’s IP/URL in the Master IP/URL text field.
2. The default Master Port Number assignment is 1319 - do not change this number.
3. Under Authentication Settings, enter the NetLinx Master’s Username and Password (only required if the target
NetLinx Master has Authentication enabled).
4. Press Accept to save changes.
5. Press Reboot to reboot the NXB-KNX. Once rebooted, the NXB-KNX should be in communication with the
Specified NetLinx Master (indicated by a steady blink on the NXB-KNX Status LED).
Security Settings
FIG. 11 Device Configuration page - Master Connection tab