User Guide

NXC-REL10 Relay Control Card
28
NXF CardFrame, NetLinx Control Cards, and NetModules
NXC-REL10 Channel Assignments
Channels 1-10 represent relays 1-10.
NXC-REL10 Connections/Wiring
The NXC-REL10 Control Card has 10 relays that are independently controlled and electrically
isolated. The relay contacts are rated for a maximum of 1 A @ 0-24 VAC or 0-28 VDC (resistive).
Jumpers located on the Card allow you to select Normally Open (NO) or Normally Closed (NC)
contact settings:
 Normally open (NO) mode setting on jumper pins 1 and 2 (default).
 Normally closed (NC) mode setting on jumper pins 2 and 3.