Instruction manual

Upgrading Firmware

Modero X® Series G4 Touch Panels Instruction Manual

3. Copy the firmware (.kit) file to be transferred (for example, "SW5968_ModeroX_v2_103_52.kit") into this directory

on the flash drive.

4. Eject or unmount the flash drive from the PC.

Transfer the Firmware File From the Flash Drive to the Touch Panel

Connect the USB Flash Drive to one of the USB Type A ports on the panel.

2. Go to the Install Firmware setup page (Configuration->Admin->Install Firmware):

a. Press and hold the Sleep button for 3 seconds to open the Settings page.

b. From the Settings page, select the Configuration page. This may require entering a password.

c. From the Configuration page, select Admin.

d. From the Admin Configuration page, select Install Firmware.

3. In the Firmware Installation page, select New to install new firmware from external disk.

4. The popup page displays the name of the firmware file (for example, "SW5968_ModeroX_v2_103_52.kit").

5. Select Ye s, and follow the directions displayed on the popup.

Directory Names for Firmware Files - by Touch Panel Type

Directory Name Panel Type(s)

"MXD-2000XL-PAN" MXD-2000XL-PAN-P (FG5968-05)

MXD-2000XL-PAN-L (FG5968-11)

MXD-2000XL-PAN-P-NC (FG5968-33)

MXD-2000XL-PAN-L-NC (FG5968-34)

"MXT-2000XL-PAN" MXT-2000XL-PAN (FG5968-01) MXT-2000XL-PAN-NC (FG5968-32)

"MXD-1900L-PAN" MXD-1900L-PAN-P (FG5968-06)

MXD-1900L-PAN-L (FG5968-12)

MXD-1900L-PAN-P-NC (FG5968-22)

MXD-1900L-PAN-L-NC (FG5968-23)

"MXT-1900L-PAN" MXT-1900L-PAN (FG5968-02) MXT-1900L-PAN-NC (FG5968-21)

"MXT-1000" MXT-1000 (FG5968-03) MXT-1000-NC (FG5968-24)

"MXD-1000" MXD-1000-P (FG5968-07)

MXD-1000-L (FG5968-13)

MXD-1000-P-NC (FG5968-25)

MXD-1000-L-NC (FG5968-26)

"MXT-700" MXT-700 (FG5968-04) MXT-700-NC (FG5968-27)

"MXD-700" MXD-700-P (FG5968-08)

MXD-700-L (FG5968-14)

MXD-700-P-NC (FG5968-28)

MXD-700-L-NC (FG5968-29)

"MXD-430" MXD-430-P (FG5968-15)

Make sure this is the only .kit file in this directory - if not, the latest version will be

used.

The Micro USB port cannot be used for firmware upgrades.

FIG. 63 Settings page