Instruction manual

Installing Wall-Mount (MXD) Panels

Modero X® Series G4 Touch Panels Instruction Manual

10. Reconnect the terminal Ethernet and USB to their respective locations on either the Ethernet port or NetLinx

Master.

Power via PoE

Power for the MXD-430 is supplied via PoE (Power Over Ethernet), utilizing an AMX-certified, capacitive touch-

compliant PoE injector such as the PS-POE-AT High Power PoE Injector (FG423-81) or other approved AMX PoE

power source. The incoming Ethernet cable should be connected to the RJ45 port on the device.

FIG. 58 Installing the MXD-430

Mounting Surface

Backbox

Latch Hooks

Snap

If you see a gap between the panel and the Backbox or feel any binding while locking

down the panel, stop immediately and verify that no cables or other items are in the

way. Do not force the panel into position, as this can cause damage to the touch

screen or the panel electronics.