Instruction manual

Installing Wall-Mount (MXD) Panels

Modero X® Series G4 Touch Panels Instruction Manual

8. Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify

that the panel is receiving power and functioning properly to prevent repetition of the installation.

9. Latch the panel onto the hooks on the Backbox. Push in on the bottom snaps (Landscape) or on the right (Portrait)

gently but firmly until the snaps “click” to lock it down (FIG. 46)..

10. Reconnect the terminal Ethernet and USB cables to their respective ports.

Do not disconnect the connectors from the touch panel. The unit must be installed

with the attached connectors before being inserted into the mounting surface.

FIG. 46 Installing the MXD-1000 / MXD-700

Mounting Surface

Backbox

Latch Hooks

Snaps

If a gap is observed between the panel and the Backbox, or feel any binding while

locking down the panel, stop immediately and verify that no cables or other items are

in the way. Do not force the panel into position, as this can cause damage to the

touch screen or the panel electronics.