Owner`s manual

Thermostatic Valve Actuators
Honeywell Water Product Solutions
63-8702 79
Dimensions Diagrams
Application: High Capacity Thermostatic Radiator Actuator
Used With Valve: V110
Collar Diameter: 1 19/32 in. (40 mm)
CAPILLARY TUBE LENGTH
4 FT. 6 IN. (1.37 m)
M3221C
CAPILLARY TUBE
LENGTH 4 FT. 6 IN. (1.37 m)
2-31/32 (75)
2-5/32
(55)
2-1/8 (54)
1-13/16
(46)
3 5/16
(84)
MAX.
2 1/8 (54)
M9731
3
(86)
3
8
M3215A
2
(51)
H
4
T104V
Product Number Application Type
Capillary Length
Temperature
Range Sensor Setpoint
Comments(ft) (m) (F) (C) (Integral or Remote)
T104A1040 Self-contained controller with sensor, setpoint dial
and valve actuator in one unit. Adjustable limits.
Mount horizontal. Not for use inside enclosures or in
locations with restricted airflow around sensor. For
V110 valves.
— — 43 F to
79 F
6 C to
26 C
Integral Integral Adjustable
Limits
T104B1038 Controller with combined remote setpoint and sensor
mounted on a wall. Setpoint/sensor connect with a
capillary tube to an actuator, which mounts on the
valve body. For V110 valves.
6 ft. 8 in. 2 m 48 F to
79 F
9 C to
26 C
Remote Remote —
T104B1046 Controller with combined remote setpoint and sensor
mounted on a wall. Setpoint/sensor connect with a
capillary tube to an actuator, which mounts on the
valve body. For V110 valves.
16 ft. 4.9 m 48 F to
79 F
9 C to
26 C
Remote Remote —
T104C1036 Controller with remote setpoint and sensor normally
mounted with setpoint dial mounted on outside
cabinet or enclosure; sensor mounted beneath
heating coils in cold air return. Double capillaries. For
V110 valves.
Two 4 1/2 ft. Two 1.4 m 48 F to
79 F
9 C to
26 C
Remote Remote —
T104C1052 Controller with remote setpoint and sensor normally
mounted with setpoint dial mounted on outside
cabinet or enclosure; sensor mounted beneath
heating coils in cold air return, below the heat
source. Double capillaries. For V110 valves.
Two 4 1/2 ft. Two 1.4 m 48 F to
79 F
9 C to
26 C
Remote Remote With special
scale
T104F1512 Thermostatic radiator valve controller for use with
V110 series valves. With remote temperature
sensing and integral set point. Adjustable limits.
6 ft. 8 in. 2 m 43 F to
79 F
6 C to
26 C
Remote Integral Adjustable
Limits
T104V1422 Self-contained controller with sensor, setpoint dial
and valve actuator in one unit. Locks to valve body.
Rugged design. Adjustable setpoint under locking
cap. Factory set at 68 F (20 C). Mounts horizontal.
Not for use in enclosures. For V110 valves.
— — 43 F to
79 F
6 C to
26 C
Integral Integral Vandal Proof