Owner`s manual

Thermostatic Valve Actuators
Honeywell Water Product Solutions
74 customer.honeywell.com 63-8702
Thermostatic Valve Actuator—Accessories
MV100; MV110 Electric Zone Valve Actuators
24V heat motor actuators used to operate V100 and V110 valves in
hot water and steam heating systems.
Provide efficient zone control for hot water or two-pipe steam
heating systems when used with low voltage thermostats, such as
T810, T822 or Honeywell Chronotherm® III thermostats.
Additional system components may include AT140 Transformer, and
MZ110 or MZ410 Elapsed Time Meter.
Built-in, normally open end switch may be used to operate additional
components, such as circulator pump or burner relays.
Compact size for ease of installation.
Smooth response of heat motor prevents water hammer, providing
silent operation and reliability.
Heater element has reduced power consumption, eliminating the
need for continuous on-off cycling of the heat motor during
operation.
Dimensions Diagram
Application: Replacement Actuator
Used With Valve: V100, V2000
Electrical Ratings: 24 Vac, 3 VA, 0.125A Draw
End Switch Rating: 240V/50-60Hz, 5 A
Timing: 5 minutes Open / 5 minutes Close (max.)
Maximum Ambient Temperature: 122 F (50 C)
Product Number Description Used With
202814 Locking cap for T100V and T104V thermostatic radiator valve controllers. T100V; T104V;
272873 MT100F driver upgrade kit. For use with old and new V100. V100;
H
Braukmann
xxxxxxxx
xxxxx
2-7/8
(74)
2 (51)
M3187A
MV100
Product Number Application Type Description Comments Used With
MV100S8011 24 V normally closed Heat
Motor actuator for Hot water
and steam heating systems
24 Vac Normally Closed Actuator with end switch for use
with V100 valve in hydronic and steam heating systems
Can be used with V135 for
two-position Control
V100,
V2000
MV110S8005 24 V normally closed Heat
Motor actuator for Hot water
and steam heating systems
24 Vac Normally Closed Actuator with end switch for use
with V110 valves in hydronic and steam heating systems
Can be used with V135 for
two-position Control
V110