Owner`s manual

Thermostatic Radiator Valves
Honeywell Water Product Solutions
63-8702 73
MT100; MT110 Cartridge Changing Tool
The MT110 Valve Cartridge Changing Tool enables the user to
remove, and clean or replace the valve cartridge while the valve
remains pressurized. Boiler shutdown is not required.
• MT110 for V110 Series valves.
Application: Cartridge changing tool
Used With Valve: V100
Collar Diameter: 1 3/16 in. (30 mm)
Remove control and loosen valve cartridge slightly.
Tighten Cartridge Changer to valve body and close off drain cock.
Open shut-off on drain cock, removing excess water and steam
from chamber.
Unscrew end cap and remove cartridge from chamber. Clean or
replace cartridge.
M16274
A
B
M16273
A
B
C
D
M16275
A
B
C
M16276
A
B
Product Number Application Type Description Comments Used With
MT100C1016 Cartridge changing tool, in service, in line, under pressure for
V100 series valve.
Cartridge changing tool, in service, in line,
under pressure for V100 series valve.
—V100
MT100L1023 Tool to remove T100M tamper resistant direct mount control
from valve body.
Actuator Removal Tool for T100M2041
tamper-resistant, direct mount actuator from
valve body
—T100M
MT110C1011 Cartridge changing tool, in service, in line, under pressure for
V110 series valve.
Cartridge Changing Tool for in-line service
of V100 valves
—V100
MT110D1019 Socket to remove or replace cartridges on V110D, E, F series
valves; use in combination with MT110C1011 for pre-
loosening and final tightening of cartridge. Fits 3/8 in. socket
driver.
Cartridge Changing tool For CA110C
Cartridge
—