Owner`s manual

Thermostatic Mixing Valves
Honeywell Water Product Solutions
63-8702 5
Check-Adapter™-Check Valves
Check-Adapter™ For AM-1 Series NPT mixing valves without
unions or other spring check applications requiring low cracking
pressure. Spring check built into sweat adapter.
Application: AM-1 NPT Models
Materials: Brass/thermoplastic.
High-Low Temperature Control System
Honeywell HL Series™ High-Low Temperature Control System is
pre-engineered, assembled and tested for quality and
dependability to provide protection from excessive hot water
temperatures. Our systems incorporate ASSE 1017 tested and
certified thermostatic mixing valves and components for accurate
temperature control. INTELLIGRATION-Honeywell's “integrated
solution” for hot water control.
• Dialset™ Pressure regulating Valve monitors demand to control hot
water temperature
• ASSE 1003.
• Constant water temperature under low through high capacity
demand periods.
• Proportional valve (control of hot and cold water.)
• Flow reduction in seconds if cold water supply is interrupted.
• Allen wrenches included for adjustment of temperature setting.
• Union tailpieces on both mixing valves for ease of maintenance.
• Install in any position, heat trapping not required.
• Bronze / stainless steel construction for both mixing valves.
• Wear surfaces on both mixing valves are Teflon™ coated to prevent
mineral deposits.
• Recirculation connection in small mixing valve for fast response.
• Maximum pressure differentials between hot and cold ports 7 Psi.
• Mixing valves are ASSE 1017 tested and certified.
• Maximum inlet temperature 200 F (93 C).
• Maximum inlet pressure 150 Psig.
• Minimum temperature difference between hot and mix should be
10 F (6 C).
Application: Mixing of hot and cold water to produce tempered water
for industrial or commercial applications requiring accurate control of
domestic hot water temperature during all capacity flow rates from low
to high.
Product Number
Pipe Size
Connection Type Description (inch) (DN)
CVT-050 1/2 in. DN15 NPT 1/2 in. NPT x 1/2 in. NPT Check Adapter
CVT-075 3/4 in. DN20 NPT 3/4 in. NPT x 3/4 in. Check Adapter
Product Number
Pipe Size
Connection Type
Operating Temperature
Range (F)(inch) DN
HL150 1 1/4 in. Inlet port; 1 1/2 in. Outlet port DN32 Inlet port; DN40 Outlet port NPT 110 F to 150 F
HL200 2 in. Inlet port; 2 in. Outlet port DN50 Inlet port; DN50 Outlet port NPT 110 F to 150 F
HL250 2 in. Inlet port; 2 1/2 in. Outlet port DN50 Inlet port; DN65 Outlet port NPT 110 F to 150 F