Water Products Count On One Brand For A Full Line Of Hydronic Heating And Potable Water Solutions WAT160 Catalog_V2.
Honeywell Hydronic Heating and Potable Water Products • • • • • State-of-the-art hydronic heating and plumbing specalities Unique engineering features Highest quality assurance - 100% tested Easy to install and service Save energy AMX Series DirectConnect™ Thermostatic Mixing Valve DS05/DS06 Series DialSet® Pressure Regulating Valve • DirectConnect™ to Water Heater - NPT bottom connection attaches easily • Engineered for fast installation -orientation of the mix and cold ports eliminates the need for el
Table of Contents Potable Water Control Products Thermostatic Mixing Valves ........................................................................................................................................ 1 Pressure Regulator Valves ......................................................................................................................................... 9 Ball Valves for Shut-off Applications .............................................................................................
Model Number Index A H AM Series ............. SD_IS_150 ............................ 1 AMCU .................. ................................................ 8 AMX Series ........... 62-3074 ................................. 3 AP400 .................. .............................................. 37 AP401 .................. .............................................. 37 AP402 .................. .............................................. 37 B B100...................... 62-3026 .................
Subject Index Numerics 7 Day Programmable Thermostat 82 H Hygrovent 41 A Accessories Air Vents 40 Pressure Regulator Valves 14 Thermostatic Radiator Valve Actuators 74 Thermostatic Radiator Valves 72 Water Filters 27 Actuators Thermostatic Radiator Valves 74, 75, 78 Air Eliminators 41–45 SuperVent 45 Commercial 44 Hydronic Heating 43 Air Purger 37 Air Vents 38–40 Accessories 40 Commercial GoldTop 41 Heating Systems 39 Hot Water Hygrovent 41 Industrial 38 MaxiVent 42 Non-Heating Systems 40 Residential Gold
iv customer.honeywell.
Thermostatic Mixing Valves AM-1 Series—Thermostatic Mixing Valve ® The Honeywell AM-1 series accurately adjusts, maintains and limits the hot water temperature to a desired setting selected by the user. In domestic water applications it offers scalding protection and bacteria growth control. By installing a Honeywell AM-1 mixing valve and raising water heater storage temperature setting and limiting mixed outlet water temperature to safe temperature more usable hot water is available.
Thermostatic Mixing Valves Pipe Size Capacity (Cv) Operating Temperature Range Product Number (inch) DN Connection Type (F) (C) ASSE AM100C-1 1/2 in. DN15 NPT 3.2 80 F to 120 F 27 C to 49 C 1017 (100 F - 145 F, 80 F - 120 F only) 1016 AM100C-US-1 1/2 in. DN15 Union Sweat 3.9 80 F to 120 F 27 C to 49 C 1017 (100 F - 145 F, 80 F - 120 F only) 1016 AM100C-UT-1 1/2 in. DN15 Union NPT 3.
Thermostatic Mixing Valves AMX Series DirectConnect™ Thermostatic Mixing Valves ® Patented DirectConnect design reduces installation time. Orientation of cold and hot ports eliminates need for elbows and tees on typical water heater installations. Added Safety designed to prevent scalding. Increased user comfort for more available hot water.Designed to be directly installed on water heater hot outlet port.
Thermostatic Mixing Valves Thermostat Mixing Valve Installation AM-1 Series Replacement Part Operating Temperature Range Product Number (F) (C) Description Application AM-1-025RP 100 F to 145 F 80 to 180 F 38 F to 63 C 27 C to 49 C Replacement Part AM-1 Series AM Series Standard and R range mixing valves AM-1-020RP 80 F to 120 F (B range) 27 C to 49 C (B range) Replacement Part AM-1 Series 60 F to 100 F (C range) 16 C to 38 C (C range) AM Series B and C range mixing valves AMU200-RP — AM Ser
Thermostatic Mixing Valves Check-Adapter™-Check Valves Check-Adapter™ For AM-1 Series NPT mixing valves without unions or other spring check applications requiring low cracking pressure. Spring check built into sweat adapter. Application: AM-1 NPT Models Materials: Brass/thermoplastic. Pipe Size Product Number (inch) (DN) Connection Type Description CVT-050 1/2 in. DN15 NPT 1/2 in. NPT x 1/2 in. NPT Check Adapter CVT-075 3/4 in. DN20 NPT 3/4 in. NPT x 3/4 in.
Thermostatic Mixing Valves MX Series Large Flow Proportional Mixing or Diverting Valve. Protects People and Equipment, Saves Energy The MX Series is a state-of-the-art mixing valve with Teflon wear surfaces to prevent calcium buildup. Valve controls hot and cold supply based on control setting. If cold water is shut off, the valve will reduce the mixed flow rate in seconds (speed/residual flow rate varies by size).
Thermostatic Mixing Valves MX Series Replacement Gasket Kits Application: MX Series Pipe Size Product Number (inch) DN Description MX050-RP 1/2 in. DN15 1/2 inch Recirculation Adapter MX100-RP 1 in. DN25 1 inch Gasket Kit for MX Series mixing valves MX125-RP 1 1/4 in. DN32 1 1/4 inch Gasket Kit for MX Series mixing valves MX150-RP 1 1/2 in. DN40 1 1/2 inch Gasket Kit for MX mixing valves MX200-RP 2 in. DN50 2 inch Gasket Kit for MX mixing valves MX250-RP 2 1/2 in.
Thermostatic Mixing Valves UMV Series Undersink Mixing Valves Universal 3 or 4 Port connection for 3/8 in. compression undersink applications. Includes internal check valves in hot and cold ports to prevent cross flow. Easy installation kit includes 3/8 compression nuts, ferrels and stand-offs for secure mounting. Forged brass body construction. Tamper resistant temperature control handwheel locks into desired temperature position.
Pressure Regulator Valves D146 Differential Pressure Regulators Used to eliminate excessive pump head pressure when most radiator valves are closed due to reduced demand. • Install between supply and return sides of a hydronic system to stabilize pressure differential and reduce the effects of demand changes. • Control maintains a constant differential between the two sides by opening a bypass whenever the difference between supply and return reaches the setpoint. • Provides silent, trouble-free service.
Pressure Regulator Valves D05T Pressure Regulating Valve—Compact Design Compact Design pressure regulating valve for new residential and light commercial construction, drip irrigation and other applications requiring sensitive and accurate regulation.
Pressure Regulator Valves NEW DialSet Pressure Regulating Valves Transition Models Product Number Replaces NEW DialSet Pressure Regulating Valves Description DS05C1006 D05A1098 1/2 in. Dialset Non union body internal & external npt threaded DS05C1014 D05A1155, D05G1038, DS05G1044 1/2 in. Dialset Single union sweat DS05C1022 D05A1122, D05G1004, DS05G1002 1/2 in. dialset single union threaded DS05C1030 D05A1106 3/4 in.
Pressure Regulator Valves DS05 “DialSet” Pressure Regulating Valves • • • • • • • • Valves for new residential and light commercial construction, drip irrigation, and other applications requiring highly sensitive and accurate regulation. Easy DialSet® Adjustment (no gauge required) Calibrated Adjustment Dial: Yes Reducing Ratio: 10:1 maximum Maximum Inlet Pressure Rating (psi): 400 psi Pipe Connection: Female NPT threaded inlet and outlet. Externally threaded for unions.
Pressure Regulator Valves Pipe Size Product Number (inch) DN Outlet Pressure Dimensions, Approximate Adjustment Range (psi) (inch) (mm) Union Fittings DS05D1070 1 1/4 in. DN32 15-150 psi 8 5/8 in. high x 218 mm high x 7 5/16 in. long 186 mm long Double-union, internally threaded tailpieces DS05G1085 1 1/4 in. DN32 15-150 psi 8 5/8 in. high x 218 mm high x 6 in. long 152 mm long Single union, internally threaded tailpiece. Second union available as accessories. DS05G1093 1 1/4 in.
Pressure Regulator Valves PRV Jumper Kits Temporary stand-in piping components for Pressure Regulating Valves "rough-in" service. Pipe Size Product Number (inch) DN Pipe Connection Description K06U1135 1 1/4 in. DN32 — Union Kit for 1 1/4 in. NPT D05 and DS05 Series valves K06U1150 3/4 in. DN20 Sweat 3/4 in. Jumper Kit- 2 sweat unions, gaskets and nuts K06U1168 1 in. DN25 Sweat 1 in. PRV Jumper Kit- 2 Sweat unions, gaskets, nuts K06U1184 3/4 in. DN20 Female NPT 3/4 in.
Pressure Regulator Valves Repair Kit Exploded View of valve to display how to repair ADJUSTING SCREW Product Number Description K05A1025 Includes Used With Repair Kit including Cartridge, D50T cartridge, screen and Screen, O-rings O-ring LOCKING NUT BONNET SPRING CUP SPRING WASHER CARTRIDGE O-RING SCREEN O-RING GASKET TAILPIECE NUT NUT TAILPIECE BODY GAUGE TAP PLUG GASKET M23250 Honeywell Water Product Solutions 63-8702 15
Ball Valves for Shut-off Applications B100 Bronze Ball Valve for Shutoff Applications Fully Ported Bronze Ball Valves for most heating, plumbing and industrial shut-off applications. • Broad temperature and pressure ratings for wide range of applications-water, oil and steam service. • Cast bronze (85-5-5) is ideal for applications requiring low zinc content. • Fully ported bronze ball valves have higher flow rates with less turbulence, noise and pressure drop than reduced or standard port ball valves.
Ball Valves for Shut-off Applications Replacement Parts: 3008300 Replacement handle for 3/8 in. and 1/2 in. B100 series valves 3008301 Replacement handle for 3/4 in. and 1 in. B100 series valves 3008302 Replacement handle for 1 1/4 in. and 1 1/2 in. B100 series valves 272790 Yellow plastic coated steel lever for B200 1/2 and 3/4 inch, includes Hex nut 3008303 Replacement handle for 2 in. B100 series valves 3008304 Replacement handle for 2 1/2 in. B100 series valves 3008305 Replacement handle for 3 in.
Ball Valves for Shut-off Applications B200 Brass Ball Valves for Shutoff Applications • • • • • • • Fully Ported Brass Ball Valves for most heating, plumbing and industrial shut-off applications. The B200S valves have increased agency listing approvals as well as an enhanced design for increased solderability and longer service life.
Ball Valves for Shut-off Applications Pipe Size Product Number (inch) DN Dimensions, Approximate Capacity (Cv) (inch) (mm) Handle Type Gas Rated Gas Approvals B200S7049 1 1/4 in. DN32 82 Cv 2 1/2 in. x 64 mm high x 3.937 in. x 100 mm long x 4 11/32 in. (handle length) 110 mm handle length Zinc plated steel No with vinyl cover No B200S7056 1 1/2 in. DN40 195 Cv 3 7/32 in. high x 4 21/32 in. long x 5 5/16 in.
Water Filters F74C Reversing Rinsing Filter F74C Reverse Rinsing Filters ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, such as rust particle and grains of sand. Both horizontal and vertical installations are possible. • Whole House Protection • Filtered water supplied even during reverse rinsing. Patented reverse rinsing system. • Fast and thorough cleaning of the filter with a small amount of water.
Water Filters Exploded View and Parts List 1 2 3 3 2 1 5 4 No. Description Part Number 1 3/4 in. Sweat Tailpiece U76S5051 1 1 in. Sweat Tailpiece U76S5023 2 3/4 in. NPT Tailpiece U76T1014 2 1 in. NPT Tailpiece U76T1022 3 Union Gasket, 3/4 in. 901444 3 Union Gasket, 1 in. 901445 4 Replacement Filter Assembly for F74C, 3/4 in. and 1 in., 100 Micron.
Water Filters F76 Water Filters High flow capacity water filter used to remove sediment and debris from residential or commercial water systems. • Whole House Protection • Ideally suited for sediment removal applications that would quickly plug and restrict the flow of normal filters. • Used as a prefilter, the F76 protects elements of the water system, including specialized treatment devices or other common fixtures and appliances.
Water Filters Exploded View and Parts LIst for F76S A 100 150 50 C B 200 0 ywelln Hone kman Brau B C D K D E F L M G N P H J R Q OR T S Parts List is on the following page.
Water Filters Parts and Accessories for new style F76S filters Description (A) Pressure Gauge (new style F76S only) Standard Pressure (230 psi) High Pressure (400 psi) (B) Tailpieces (same for new and old style) Sweat Threaded (shown) (C) Union Nuts (D) Tailpiece Gaskets (sold in packs of 10) (E) Guide Barrel Screen Insert Complete (new style only) 20 Micron 50 Micron 100 Micron 200 Micron Includes: (F) Barrel O Ring (G) Impeller and Screen Assembly (J) Chamber O Ring (H) Base Spring (J) Chamber O Ring (sol
Water Filters FF06 Rinseable Fine Filter The FF06 Rinseable Fine Filter ensures a continuous supply of filtered water. The fine filter stops the flow of particulates, such as rust particles and grains of sand. Sediment collected at the bottom of the bowl can simply be removed by flushing with the turn of a knob. This compact filter was designed to fit where the space is limited. • Easy installation. • Same installed dimensions as F74C for easy future upgrade to a backwashable filter.
Water Filters Exploded View and Parts List for FF06 A B C C B A F E D G Item Number A B Part Number U76S5015 Description 3/4 in. sweat tapilpiece U76S55023 1 in. sweat tapilpiece U76T1014 3/4 in. NPT tapilpiece U76T1022 1 in. NPT tapilpiece 0901444 Gasket 3/4 in. (10 pcs) 0901445 Gasket 1 in.
Water Filters Water Sediment Filter Parts and Accessories Product Number Description Used With AF11S-112A 100 Micron Screen kit for F76S Water Filter 1-1/2 in. to 2 in. F76S; AF11S-112B 20 Micron Screen kit for F76S Water Filter 1-1/2 in. to 2 in. F76S; AF11S-112C 50 Micron Screen kit for F76S Water Filter 1-1/2 in. to 2 in. F76S; AF11S-112D 200 Micron Screen kit for F76S Water Filter 1-1/2 in. to 2 in. F76S; AF11S-1A 100 Micron Screen kit for F76S Water Filter 1/2 in. to 1-1/4 in.
Backwash Controls MV876 Automatic Backwash Control The MV876B Automatic-Backwash Control is available as an accessory. This control is fitted to the drain valve and is programmed by the user to automatically perform the backwash function according to the desired interval. • net fitting simplifies upgrade to automatic backwash. • 16 field-selectable backwash intervals (from every four minutes to once every three months) eliminate need for external timer.
Y-Strainers FY32 Y-Strainer Bronze Y - pattern strainers protect regulators, pumps, meters and other controls and equipment from damage due to sediment, scale, metal chips or other foreign materials. • For use with water, steam, oil, air and gas. • Includes blow-off tapped cap (closure plug not supplied). • Minimum pressure loss, even with 50 percent clogged screen. • Corrosion-resistant bronze body and cap, with 18 mesh stainless steel screen.
30 customer.honeywell.
Motorized Zone Valves MZV Series Motorized Zone Valves • • • • • • • • • • • • • Pre-balance valve Honeywell MZV Series is the first linear zone valve with a built-in balancing plug that permits pre-balancing for each zone. Dimensions Diagram • • • • • • • Rack and pinion linear design. Fast acting, 10 seconds to open, 5 seconds to close. Two piece rack design to extend service life. Low power consumption, 8 valves, 40 VA transformer. External valve position indicator. Quiet operation, no water hammer.
Motorized Zone Valves Pipe Size Maximum Water Pressure Product Number (inch) DN Connection Type Maximum Close-off Pressure (psi) (psi) (kPa) MZV527 1 1/4 in. DN32 Sweat 17.5 psi 125 psi 862 kPa MZV527E 1 1/4 in. DN32 Sweat 17.
Multiple Zone Valves SZ2 Series Multiple Zone Valve Return Manifold- with MZV Operators SparcoZone2™ is the only multiple zone valve that is preassembled, prewired and ready to connect. It simplifies installation, saves labor, parts, time and money. The SparcoZone2™ multiple zone valve concept brings a factory assembled, piped and wired package to the job site that is easy to install and service. The reduced number of joints and wiring connections saves hours of labor and parts.
Multiple Zone Valves S2Z Series Multiple Zone Valve Snow Melt Manifold- with Manual Valves • • • • • • SparcoZone2™ is the only multiple zone valve that is preassembled, prewired and ready to connect. It simplifies installation, saves labor, parts, time and money. The SparcoZone2™ multiple zone valve concept brings a factory assembled, piped and wired package to the job site that is easy to install and service. The reduced number of joints and wiring connections saves hours of labor and parts.
Multiple Zone Valves S2Z Series Multiple Zoning Controller SparcoZone2™ is the only multiple zone valve that is preassembled, prewired and ready to connect. It simplifies installation, saves labor, parts, time and money. The SparcoZone2™ multiple zone valve concept brings a factory assembled, piped and wired package to the job site that is easy to install and service. The reduced number of joints and wiring connections saves hours of labor and parts.
Multiple Zone Valves Current Draw: 0.25 A Flow Rate: 10 gpm Maximum Differential Pressure: 40 ft., 17.5 psi Maximum Operating Pressure: 125 psi Maximum Temperature: 220 F (104 C) Product Number Number of Zones Connection Type Size Description S2Z3S3 3 Zones Sweat 3/4 in. 3 Zones Sweat Valve S2Z3T3 3 Zones Threaded 3/4 in.
FlowCheck Valves FlowCheck—Gravity Check Valves Honeywell FlowChecks prevent the flow of water to any part of a system when the pump is shut off. They permit summer/winter operation of indirect water heaters. Honeywell FlowChecks are easy to clean. Just unscrew the top of the valve for inspection and cleaning. Bronze and brass construction. To allow gravity flow, the FlowCheck can be changed to manual operation by turning the hand wheel counterclockwise (open position).
Air Vents EA79 Industrial Air Vents • • • Internal parts made of corrosion-resistant and chemical-resistant materials for use with water systems containing propylene glycol, mineral oils, or petroleum-based oils. Replaces Hoffman # 79 or Dole # 75 Vents. Maintains quiet and efficient operation. EA79 capacities. 300 250 CUBIC FEET/HOUR 200 Purges air from high pressure mains and equipment in closed hot or cold water systems. • Built-in shutoff valve for servicing without system shutdown.
Air Vents EA122A Automatic Air Vent for Heating System Applications The Honeywell EA122A Automatic Air Vent purges air from high pressure mains and equipment in hot or cold closed water systems. • Includes removable float/valve assembly for easy servicing. • Not for use in steam systems. • Body, cover and float assembly made of thermoplastics.
Air Vents EA122A Automatic Air Vent for Non-Heating System Applications The Honeywell EA122A Automatic Air Vent purges air from high pressure mains and equipment in hot or cold closed water systems. • Includes removable float/valve assembly for easy servicing. • Not for use in steam systems. • Body, cover and float assembly made of thermoplastics.
Air Vents GoldTop™—Universal Air Vent for Residential and Commercial Heating and Cooling Systems. Installers, wholesalers and OEM's can now stock one vent for all their venting needs between 1 and 150 psi systems and obtain the highest venting performance. Honeywell has reinvented the vent! Air vents have been removing air from heating and cooling systems for decades. Some were better than others. Many stopped venting after initial filling.
Air Vents MaxiVent™—Air Vent for heating and cooling systems The Maxivent features a low profile, fit anywhere solid brass body and cover, and a high temperature polypropylene float. Application: Residential or commercial heating an cooling systems Materials (Body): Brass Maximum Operating Temperature: 240 F (115 C) Maximum Operating Pressure: 150 psi (1034 kPa) Size Dimensions, Approximate Weight Connection Connection Type Size (lb) Product Number (inch) (inch) FV147 1/8 in. 2 in. high x 1 5/32 in.
Air Eliminators SuperVent™ Air Eliminator- Eliminates Air from Hydronic Heating Systems without Bleeding How it works Conventional automatic air vents installed in Hydronic heating systems can leak and cause inefficient system operation. To effectively eliminate air from the system without bleeding, air bubbles ned to be vented. The NEW Honeywell SuperVent purges air through a no clog vent assembly that controls dirt and debris to minimize air vent fouling. • No clog vent. • Dirt and Debris resistant.
Air Eliminators SuperVent™—The Best Commercial Air Eliminator. Removes All Trapped Air, Micro Bubbles and Dirt from Heating, Cooling and Domestic Water Systems. Conventional automatic air vents installed in Hydronic heating systems can leak and cause inefficient system operation. To effectively eliminate air from the system without bleeding, air bubbles ned to be vented. The NEW Honeywell SuperVent purges air through a no clog vent assembly that controls dirt and debris to minimize air vent fouling.
Air Eliminators Size Maximum Diameter Dimensions, Approximate Capacity Weight Connection Connection Type Size (Cv) (lb) (kg) Product Number (inch) (inch) (mm) (inch) (mm) PV400F 4 in. 8 5/8 in. 218.4 mm 23.58 in. long x 15.5 in. wide 598.9 mm long x 393.7 mm wide Flanged 4 In. 360 Cv 78.5 lb 35.61 kg PV400FC 4 in. 13 1/2 in. 342.9 mm 23.0 in. long x 16.0 in. wide 584.2 mm long x 406.4 mm wide Flanged Cleanable 4 In. 360 Cv 150 lb 68.04 kg PV400T 4 in. 8 5/8 in. 218.4 mm 23.
Backflow Preventers Backflow Preventers—Dual Check for Domestic water Backflow Preventers-Dual Check for Domestic water • Dual Check Valves may be installed in either a vertical or horizontal position and should be installed immediately down stream of the water meter. Dimensions, Approximate: 4 3/8 in. long x 2 1/8 in.
Boiler Fill Valves FM Boiler Fill Valves Pressure regulating valve for automatic control of boiler feed water and other pressure reducing applications. Especially constructed for expansion tank mounting. • Fast fill feature. • Built-in check valve. Application: Pressure regulating valve for automatic control of boiler feed water. Connection Type: NPT Mixing (Supply) Maximum Control Temperature: 1/2 in. Pipe Size: 1/2 in.
Expansion Tank Kits Combo Expansion Tank Kit with Air Purger Expansion Tanks are designed to absorb hot water expansion in closed heating systems. TL and TAX tanks are used in large installations. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tank Kits Combo Expansion Tank Kit with Air Purger and Fill Valve Expansion Tanks are designed to absorb hot water expansion in closed heating systems. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tank Kits Combo Expansion Tank Kit with Air Vent Honeywell Expansion Tanks are designed to absorb hot water expansion in closed heating systems. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped design. Prepressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tank Kits TK Series Combo Tank Kits with SuperVent Expansion Tanks are designed to absorb hot water expansion in closed heating systems. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tank Kits TX Series Combo Tank Kits with BackFlow Preventer- Potable Water The Honeywell Thermal Expansion Absorber is a welded, pressurized expansion tank with a butyl diaphragm to control excess pressure in potable hot water systems. The Thermal Expansion Tank controls pressure build-up in the system, eliminates relief valve spillage, protects fixtures and extends water heater life. • Heavy duty butyl rubber diaphragm (FDA approved) isolates water from air.
Expansion Tanks TK300 Series Expansion Tanks- Heating Honeywell Expansion Tanks are designed to absorb hot water expansion in closed heating systems. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped design. Prepressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tanks Expansion Tanks—Domestic Hot Water Systems- Large Capacity The Honeywell Thermal Expansion Absorber is a welded, pressurized expansions tank with a butyl diaphragm to control excess pressure in potable hot water systems. The Thermal Expansion Tanks controls pressure build-up in the system, eliminates relief valve spillage, protects fixtures and extends water heater life. • Heavy Duty butyl rubber diaphragm (FDA Approved) isolates water from air.
Expansion Tanks TAX Series Expansion Tanks- Commercial Usage TAX Series (commercial) Expansion Tanks are designed to absorb hot water expansion in closed heating systems. TAX tanks are used in large installations. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped, design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tanks TAXV Series Expansion Tank- Commercial Usage TAX Series (commercial) Expansion Tanks are designed to absorb hot water expansion in closed heating systems. TAX tanks are used in large installations. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped, design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tanks TL Series Expansion Tanks- Commercial Usage Expansion Tanks are designed to absorb hot water expansion in closed heating systems. TL and TAX tanks are used in large installations. They are equipped with butyl diaphragms to separate the air from the system water (glycol). The tanks are a welded, not clamped, design. Pre-pressurized at 12 psi, the tank keeps fluids circulating and maintains minimum system pressure.
Expansion Tanks TX Series Expansion Tanks- Domestic Hot Water The Honeywell Thermal Expansion Absorber is a welded, pressurized expansion tank with a butyl diaphragm to control excess pressure in potable hot water systems. The Thermal Expansion Tank controls pressure build-up in the system, eliminates relief valve spillage, protects fixtures and extends water heater life. • Heavy duty butyl rubber diaphragm (FDA approved) isolates water from air.
Expansion Tanks TX Series Expansion Tanks—ASME Construction for Portable Water The Honeywell Thermal Expansion Absorber is a welded, pressurized expansion tank with a butyl diaphragm to control excess pressure in potable hot water systems. The Thermal Expansion Tank controls pressure build-up in the system, eliminates relief valve spillage, protects fixtures and extends water heater life. • Heavy duty butyl rubber diaphragm (FDA approved) isolates water from air.
Expansion Tanks Diameter Connection Connection Product Number Size (inch) Type (inch) (mm) TX-60V-C 3/4 in. NPT Male TX-80V-C 1 1/4 in. NPT Female 24 in. Height (inch) 16 1/4 in. 412.8 mm 34 in. high Maximum Acceptance Volume Volume (mm) (gal) (L) (gal) 864 mm high 25.0 gal 94.6 L 11.3 gal 42.8 L 609.6 mm 40 1/2 in. 1029 mm 53.0 gal high high (L) 200.6 L 34.5 gal 130.6 L Weight (lb) (kg) 125 lb 56.7 kg 190 lb 86.
Thermometers Sweat Thermometers with Thermowells Thermometer with Sweat or Threaded Connection. • Brass thermowell is included to allow the thermometer to be removed without draining the system. • 2 inch or 2 1/2 inch Dial. Materials: Case: steel; Well: brass Temperature Range: 32 F to 250 F (0 C to 121 C) Connection Size: 1/2 in. Dial Size Connection Product Number Type (inch) (mm) Length Weight (inch) (mm) (lb) (kg) Comments GS200 Sweat 2 in. 51 mm 51 mm 51 mm 0.21 lb 0.
Tridicators Tridicators Pressure/temperature gauge with relief set point indicator for boilers and shut off valve. Temperature Range: 60 F to 320 F (15 C to 160 C) Connection Size: 1/4 in.; Shutoff Valve 1/2 in. Maximum Operating Pressure: 75 psi 80 60 100 12 0 RE PR 20 E SS U 160 60 20 0 40 14 40 0 12 0 12 80 160 100 180 200 220 0 300 160 10 14 0 0 40 ERATUR 1/4 IN.
Thermostatic Radiator Valves V110 High Capacity Thermostatic Radiator Valves High Capacity Thermostatic Radiator Valves provide precise and automatic control of room temperature in two-pipe systems by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. • Continually monitors and adjusts room temperature for consistent comfort and relief from underheating and overheating.
Thermostatic Radiator Valves Application : Precise and automatic control of room temperature in two-pipe systems by modulating the flow of hot water or steam through high capacity heating units. Capacity: high Materials (Body): Nickel Plated Bronze Pipe Size Product Number (inch) DN Body Pattern V110D1000 1/2 in. DN15 V110D1008 3/4 in. V110D1016 1 in.
Thermostatic Radiator Valves V135 Thermostatic Mixing or Diverting valves Application: Thermostatic mixing/diverting valve for use in hydronic heating systems. Controls loop temperature in radiant heating systems.
Thermostatic Radiator Valves V2000 Series Standard Capacity Thermostatic Radiator Valve Body Allow automatic temperature control in two-pipe steam or hot water systems for free standing radiators, convectors and other heating units with standard capacity requirements. Provide comfort and energy savings for conversion of manual control. • Continually monitors and adjusts room temperature for consistent comfort and relief from under heating and overheating.
Thermostatic Radiator Valves Pipe Size Product Number Application (inch) Capacity DN Body Pattern (Cv) (Btu/hrsteam) Connection Type Replaces Used With V200LDSL15 For baseboards and 1/2 in. other installations with copper tubing. DN15 straight 2.5 Cv 59,100 Btu/hr Sweat both ends, no union — V200LDSL20 For baseboards and 3/4 in. other installations with copper tubing. DN20 straight 2.
Thermostatic Radiator Valves Pipe Size Capacity Product Number Application (inch) DN Body Pattern (Cv) (Btu/hrsteam) V2040ESL15 Use where installation space is limited 1/2 in. DN15 angle 2.5 Cv 59,100 Btu/hr Sweat American Steam/TRV-10 - T100BT100CT 01-510-05American 100F Steam/TRV-20 - 01-52005American Steam/TRV30 - 01-730-05 V2040ESL20 Use where installation space is limited 3/4 in. DN20 angle 2.
Thermostatic Radiator Valves V2000 Series Thermostatic Radiator Valve Cartridge Changing Tool Remove control and loosen valve cartridge slightly. Open shut-off on drain cock, removing excess water and steam from chamber. B B A A C M16274 M16275 Tighten Cartridge Changer to valve body and close off drain cock. Unscrew end cap and remove cartridge from chamber. Clean or replace cartridge.
Thermostatic Radiator Valves V2042H; V2043H One-pipe Steam Thermostatic Radiator Valve One-Pipe Steam Thermostatic Radiator Valves -Allow automatic temperature control in one-pipe steam or hot water systems for free standing radiators, convectors and other heating units with standard capacity requirements. Provide comfort and energy savings. • Continually monitors and adjusts room temperature for consistent comfort and relief from underheating and overheating.
Thermostatic Radiator Valves NEW V2000 Series TRV Valve Bodies Cross Reference to OLD Style V100 Series Use T100, T200 And MV100 Series TRV Actuators With New V2000 Series TRV Valve Bodies V2000 Series Replacement V100 Series Product Product Description V2040DSL15 V100D 1056 1/2 in. TRV Straight Body, Female NPT Inlet, Male NPT Tailpiece Outlet V2040DSL20 V100D 1064 3/4 in. TRV Straight Body, Female NPT Inlet, Male NPT Tailpiece Outlet V2040DSL25 V100D 1072 1in.
Thermostatic Radiator Valves V100P/Y100P One-pipe Steam Thermostatic Radiator Valve Product Number Application Description Used With SA123A1002 Steam Vent Steam air vent V100P Thermostatic Valve Accessories Product Number Description Used With 2428300 Seat Disc Valve V110; A104F1007 Adapter —; CA100B1008 Replacement cartridge for old style V100 (metal cartridge body) V100 Series new style; CA110C1007 Replacement Cartridge for V110 —; MT111V1000 Tool T104V1033; T100V124; Thermostati
Thermostatic Radiator Valves MT100; MT110 Cartridge Changing Tool The MT110 Valve Cartridge Changing Tool enables the user to remove, and clean or replace the valve cartridge while the valve remains pressurized. Boiler shutdown is not required. • MT110 for V110 Series valves. Application: Cartridge changing tool Used With Valve: V100 Collar Diameter: 1 3/16 in. (30 mm) Remove control and loosen valve cartridge slightly. Open shut-off on drain cock, removing excess water and steam from chamber.
Thermostatic Valve Actuators Thermostatic Valve Actuator—Accessories Product Number Description Used With 202814 Locking cap for T100V and T104V thermostatic radiator valve controllers. T100V; T104V; 272873 MT100F driver upgrade kit. For use with old and new V100. V100; MV100; MV110 Electric Zone Valve Actuators 24V heat motor actuators used to operate V100 and V110 valves in hot water and steam heating systems.
Thermostatic Valve Actuators T100;T200 Standard Capacity Thermostatic Radiator Actuators Allow automatic temperature control in two-pipe steam or hot water systems for free standing radiators, convectors, and other heating units with standard capacity requirements. Provide comfort and energy savings at affordable prices. Use with V2000 Series Standard Capacity Valves • Continually monitor and adjust room temperature for consistent comfort and relief from underheating and overheating.
Thermostatic Valve Actuators Dimensions Diagrams T200A T100F TOP 2-1/8 (54) 2 (50) CAPILLARY TUBE LENGTH 6-1/2 FT (2 m) 1-9/16 (40) 3-5/16 (84) MAX. 13/16 (20) M12928 T100M TOP 3 (76) MAX 2 (50) M12945A Typical Installation 3 (77) M12929 M4631 M12937 M3190 M12935 Application: Replacement Locking Rachet Used With Valve: V100, V2000 Collar Diameter: 1 3/16 in. (30 mm) 76 customer.honeywell.
Thermostatic Valve Actuators Capillary Length Product Number Application Type (ft) Temperature Range (C) Sensor Setpoint (m) (F) T100A1028 A self-contained control with — sensor, setpoint dial and valve actuator in one unit. Mounts horizontal. Not for use inside enclosures or where airflow around sensor is restricted. Adjustable limits. For V100 valves. — 43 F to 6 C to 79 F 26 C Integral (Integral or Remote) Replaces Integral American Steam - 02-100-00. Adjustable Taco - 5202.
Thermostatic Valve Actuators T100R Thermostatic Mixing or Diverting Valve Actuator For use in hydronic heating systems as a three-way mixing or diverting valve; controls loop temperature in radiant heating systems. • T100R Thermostatic Actuator includes strap-on-pipe sensor. • Knurled ring on T100R control head for easy attachment to V135. Application: Replacement Locking Rachet Used With Valve: V135 Collar Diameter: 1 3/16 in.
Thermostatic Valve Actuators Dimensions Diagrams CAPILLARY TUBE LENGTH 4 FT. 6 IN. (1.37 m) T104V 2-1/8 (54) 4 1-13/16 (46) 2-5/32 (55) 2 (51) H 2-31/32 (75) CAPILLARY TUBE LENGTH 4 FT. 6 IN. (1.37 m) M3221C 3 3 8 (86) 2 1/8 (54) M3215A 3 5/16 (84) MAX. Application: High Capacity Thermostatic Radiator Actuator Used With Valve: V110 Collar Diameter: 1 19/32 in.
Non-Programmable Thermostats PRO 3000 Basic Non-Programmable Thermostat The PRO series provides non-programmable thermostats for 24 Vac conventional and heat pump systems or 750 mV heating systems. • Non-programmable digital thermostat. • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions. • Precise comfort control (±1 F) maintains consistent comfort to the highest level of accuracy.
Non-Programmable Thermostats T87K,N The Round® The Round® T87K and T87N thermostats provide electronic control of 24Vac heating and cooling systems with the classic twist to set dial. • Mercury Free • Classic Styling • Premier White® • Separate temperature setting and thermometer • The T87K heat only works with 2 or 3 wire heat only systems • The Easy-To-See. has enlarged scale and raised numbers--plus it clicks at every 2 F change Dimensions, Approximate: 3 11/16 in. diameter x 1 3/4 in.
Programmable Thermostats VisionPRO® 8000 Touchscreen 7-Day Programmable Thermostat • • • • • • Menu Driven Programming Guides you through the scheduling process, showing only necessary information and choices on each screen. Ability to Select Multiple Days allows you to easily customize the thermostat for your unique schedule. Real-Time Clock keeps time during power failure; automatically updates for daylight savings. Armchair Programming allows you to remove thermostat from wall to set the schedule.
Honeywell Water Product Solutions 63-8702 83
AUTOMATION AND CONTROL PRODUCTS WARRANTY POLICY Honeywell Water Controls warrants the products in this catalog to be free from defects due to workmanship or materials, under normal use and service, for twelve (12) months from date of installation.
Honeywell Hydronic Heating and Potable Water Products • • • • • State-of-the-art hydronic heating and plumbing specalities Unique engineering features Highest quality assurance - 100% tested Easy to install and service Save energy Boiler Feed Valves/Back Flow Preventer Standard and High Capacity Thermostatic Radiator Valves • Controls incoming pressure and allows automatic control of boiler feed water • Backflow preventer operates under continuous pressure for boiler feed lines and prevents backflow whe
Members of Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 customer.honeywell.com ® U.S. Registered Trademark © 2006 Honeywell International Inc.
