User's Manual

Protected Setup Pages
78
MVP-9000i Modero® Wireless Touch Panel with Intercom
Refer to the Configuring Wireless Network Access section on page 28 and the Using the Wireless Site Survey
Tool section on page 30 for further details on these security options.
WEP (Cont.)
Default Key: Cycles through the four available WEP key identifiers to select a WEP key to
use. As the Default Key value is altered (through selection) the corresponding
“Current Key” is displayed. Each Current Key corresponds to a WEP key.
This feature is useful for accessing different networks without having to
re-enter that networks’ WEP key. It is also sometimes used to set up a
rotating key schedule to provide an extra layer of security.
Current Key: Displays the current WEP key in use.
• When working with a single panel and a single AP, manually entering the
Current Key from the AP into the selected WEP Key is recommended.
• When working with a single AP and multiple panels, generating a Current
Key using the same passphrase on all panels and then entering the
panel-produced WEP key manually into the Wireless Access Point is
recommended.
• Keys may also be examined by touching the key buttons and noting the
keyboard initialization text.
• Use the on-screen keyboard’s Clear button to erase stored key information.
Authentication: Allows only one authentication mode: Open (broadcast publicly).
•An Open network allows connections from any client without authentication.
If WEP encryption has been enabled, the client will require the WEP key to
encrypt and decrypt packets in order to communicate with the network.
Save/Cancel: • Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.