User's Manual

Battery Life and Replacement
167
MVP-9000i Modero® Wireless Touch Panel with Intercom
Battery Life and Replacement
Overview
The battery powering the MVP-9000i is designed for upwards of 300 deep discharge rechargings. Regular
shallow rechargings will extensively increase expected battery life, and the device should be stored in either
the Table Docking Station or the Wall Docking Station when not in use to keep it at an optimum charge. The
battery has reached its effective end of life after it can no longer hold more than a 70 percent charge.
IMPORTANT NOTES!
Lithium-Polymer batteries are small, compact, and ideal for providing long lasting
power. However, they must be used and charged properly. Improper use can result in
serious injury, fire, or death.
Please read and understand the following warnings. If you have any questions or
concerns with this product, please contact your AMX sales representative.
This installation requires opening the case of the MVP-9000i and working within its
internal components. If you are unwilling or unable to replace the battery, please
return the device to AMX for battery replacement.
WARNING: Misuse of a Lithium-Polymer battery may result in overheating, fire, or
explosion!
Safety Information:
• Do not dismantle, open, or shred the battery.
• Do not short circuit the battery. Do not store batteries haphazardly in a box or
drawer where they may short circuit each other or be short circuited by conductive
materials.
• Do not remove a battery from its original packaging until required for use.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• Do not subject the batteries to mechanical shock.
• In the event of a cell leaking, do not allow the liquid to come into contact with the
skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice.
• Insure battery connector is aligned and installed correctly.
• Store the batteries in a dry place with temperature between 0° C (32° F) and 40° C
(104° F).
• Do not maintain the battery on charge when not in use.
• Note that batteries give their best performance when they are operated at normal
room temperature (20°C/68°F) ± 5°C/9°F).
• When disposing of batteries, keep cells or batteries of different electrochemical
systems separate from each other.
Charging
• Use only with approved AMX charger.
Care must be taken to install the battery without damaging the battery.
Lithium-Polymer battery technology degrades in capacity over time, unless the
battery is periodically charged and discharged. AMX recommends installing all
Lithium-Polymer batteries in functional AMX products within 6 months of receipt.