User's Manual
Table Of Contents
- MVP-9000i9" Modero® ViewPoint®Touch Panel with Intercom
- Introduction
- Accessories
- Configuring Communication
- Overview
- IR Communication
- Modero Setup and System Settings
- Wireless Settings - Wireless Access Overview
- Configuring Wireless Network Access
- Step 1: Configure the Device’s WiFi Settings
- Step 2: Configure the Card’s Wireless Security Settings
- Step 3: Choose a Master Connection Mode
- Ethernet Over USB
- Using G4 Web Control to Interact with a G4 Panel
- Using the NetLinx Master To Control the G4 Panel
- Setup Pages
- Protected Setup Pages
- Upgrading Firmware
- Programming
- Overview
- Animated Transitions
- Touch Gesture Recognition
- Page Commands
- Programming Numbers
- "^" Button Commands
- Text Effects Names
- Button Query Commands
- Panel Runtime Operations
- Input Commands
- Embedded codes
- Panel Setup Commands
- Dynamic Image Commands
- Intercom Commands
- SIP Commands
- ^PHN- AUTOANSWER
- ^PHN-CALL
- ^PHN-INCOMING
- ^PHN- LINESTATE
- ^PHN- MSGWAITING
- ^PHN-PRIVACY
- ^PHN-REDIAL
- ^PHN- TRANSFERRED
- ^PHN-ANSWER
- ^PHN- AUTOANSWER
- ?PHN- AUTOANSWER
- ^PHN-CALL
- ^PHN-DTMF
- ^PHN-HANGUP
- ^PHN-HOLD
- ?PHN- LINESTATE
- ^PHN-PRIVACY
- ?PHN-PRIVACY
- ^PHN-REDIAL
- ^PHN- TRANSFER
- ^PHN-SETUP- DOMAIN
- ^PHN-SETUP- ENABLE
- ^PHN-SETUP- PASSWORD
- ^PHN-SETUP- PORT
- ^PHN-SETUP- PROXYADDR
- ^PHN-SETUP- STUNADDR
- ^PHN-SETUP- USERNAME
- Battery Life and Replacement
- Appendix A: Text Formatting
- Appendix B: Wireless Technology
- Appendix C: Troubleshooting
- Overview
- Panel Doesn’t Respond To Touches
- Battery Will Not Hold Or Take A Charge
- MVP-9000i Isn’t Appearing In The Online Tree Tab
- MVP Can’t Obtain a DHCP Address
- My WAP Doesn’t Seem To Be Working
- NetLinx Studio Only Detects One Of My Connected Masters
- Can’t Connect To a NetLinx Master
- Only One Modero Panel In My System Shows Up
- Panel Behaves Strangely After Downloading A Panel File Or Firmware
- Overview
Introduction
1
MVP-9000i Modero® Wireless Touch Panel with Intercom
Introduction
Overview
The MVP-9000i redefines touch panel control offering both wireless and wired functionality, new user
interface capabilities like gestures and animated page transitions, a stunning 9" widescreen 24-bit color
display, full digital duplex VoIP telephone or intercom interface and built-in 802.11a/b/g WiFi card with
antenna diversity. The MVP-9000i switches seamlessly to wireless mode when removed from either the MVP-
TDS-9 Table Docking Station or the MVP-WDS-9 Wall Docking Station. Transfer touch panel pages, upgrade
the firmware or display photo files using the USB or micro-SD card slot. Available in black (FG5967-01) and
white (FG5967-02), the MVP-9000i also features a capacitive touch directional pad, 4 programmable buttons,
and over 1 GB of usable flash memory. The MVP-9000i also supports 5 hours of continuous use to three days
of standby time.
Common Application
The MVP-9000i is ideal for a wide variety of residential and commercial control and automation applications
where flexibility of docked with wired Ethernet or undocked with 802.11a/b/g functionality is desired. This is
an option for extremely noisy wireless environments such as multiple dwelling units, as well as applications
that require telephone/intercom functionality.
Features
Ultra-light, compact and thin form factor
Available in your choice of black or white
Capacitive touch buttons provide simple (up/down) or sophisticated control (up/down, right/left,
select)
VoIP Intercom and SIP Telephone (requires AMX SIP Gateway) Ready
802.11a/b/g WiFi for two-way network communications
Wireless communications remain secure using WEP, WPA, WPA2, EAP-TLS, EAP-TTLS and
PEAP network security standards
Enhanced usability with microphone and speakers
Versatile placement options, including an integrated kickstand and the optional MVP-TDS-9 Table
Docking Station and MVP-WDS-9 Wall Docking Station
FIG. 1 MVP-9000i-GB touch panel
Touch screenMicrophone
Speaker grille
Status LED