Specifications

Setup Pages

MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5”

Audio Settings Page

The Audio Settings page allows adjustment of volume levels and panel sounds settings (FIG. 51).

Features on these pages include:

FIG. 51 Audio Settings pages

Audio Settings Page

Back: Saves all changes and returns to the previous page.

WiFi/Wired/USB Icon: The icon to the left of the Connection Status Icon displays whether the current

connection to the Master is

Wireless (image of a radio antenna), Wired (image

of three networked computers), or

USB (USB connection symbol).

Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant

visual indication of current connection status.

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

Master.

Default Panel Sounds: • Activating the Button Hit button plays a default sound when you touch an

active button.

•The Play Test Sound button plays a test WAV/MP3 file over the panel’s

internal speakers.

• Activating the Button Miss button plays a default sound when you touch a

non-active button or any area outside of the active button

• The singleBeep01 and singleBeep02 buttons play preselected examples of

single beeps over the panel’s internal speakers

Internal Sound Level: Adjusts the volume level on the panel’s internal speaker:

• Use the Up/Down buttons to adjust the volume (range = 0 - 100)

• The

Internal Sound Level bargraph indicates the current sound level. Press

the bargraph to the left or right of the graph marker to adjust the volume level

in one-percent increments (range = 0 - 100), or press the bargraph and hold

to move the graph marker to the desired level.

• The Mute button mutes the internal speaker volume

Audio Output: Enables USB headphone output.

Intercom Mic Level: Adjusts the volume level on the intercom’s microphone:

• Use the Up/Down buttons to adjust the microphone level (range = 0 - 100).

Press the bargraph to the left or right of the graph marker to adjust the

volume level in one-percent increments (range 0 - 100), or press the

bargraph and hold to move the graph marker to the desired level.