Specifications

Configuring Communication
27
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5”
Automatically Setting SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Press the Site Survey button at the bottom of the page to open the Wireless Site Survey page (FIG. 24).
3. Select a WEP secured AP from within the Site Survey page, and press the Connect button. .
4. If the security is not handled automatically, the information must be entered manually from the Wireless
Security popup page.
Manually Setting SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Click on the Simple button to open the Wireless Security: Simple Mode popup window (FIG. 25).
3. Press the Security Type field to select WEP.
4. Press the SSID field. From the Network Name (SSID) keyboard, enter the SSID name used by the target
Access Point (case sensitive), and press Done when finished.
The card should be given the SSID used by the target AP. If this field is left blank, the device will
attempt to connect to the first available AP.
One of the most common problems associated with connection to a AP arises because of an
improperly entered SSID. The same case must be maintained when entering this information. ABC
is not the same as Abc.
The alpha-numeric string is AMX by default, but can later be changed to any 32-character entry.
This string must be duplicated within the Network Name (SSID) field on the AP. As an example, if
the SSID is TECHPUBS, this word and the case within must match both the Network Name
FIG. 24 Site Survey of available APs (Secured AP shown selected)
FIG. 25 Wireless Security: Simple Mode popup window
Select a target
AP with the desired
level of security
Connecting to the AP
begins the communication
Encryption Button