Specifications

Introduction
7
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5”
Navigation Wheel Behavior in Each Power Mode
The behavior of the navigation wheel LED is dependent upon its status, and whether the blink function for the
LED while in sleep mode is enabled:
The navigation wheel may also be programmed to initiate specific commands. For more information, please
see the Programming section on page 95.
Navigation Wheel behavior in each Power Mode
Power Mode Power
Status
Enters Mode By - Exits Mode By - LED Behavior
(Sleep Blink
Setting)
Notes
Enabled Disabled
On (Full On) Battery
Power
N/A N/A ON ON
On (Full On) External
Power
N/A N/A ON ON
On (Full On) Charging N/A N/A BLINK BLINK
Sleep (Display Off) Battery
Power
1. Display TimeOut
setting reached
2. Sleep Send
Command
1.Touch display
2. Press Navigation
Wheel
3. Press Navigation
Wheel center
4. Apply External
Power
5. WakeUp Send
Command
OFF OFF External
Power will
transition
device to
Display On
Mode.
Sleep (Display Off) External
Power
1. Display TimeOut
setting reached
2. Sleep Send
Command
1. Touch display
2. Press Navigation
Wheel
3. Press Navigation
Wheel center
4. Apply External
Power
5. WakeUp Send
Command
OFF OFF
Sleep (Display Off) Charging 1. Display TimeOut
setting reached
2. Sleep Send
Command
1. Touch Display
2. Press Navigation
Wheel
3. Press Navigation
Wheel center
4. Apply External
Power
5. WakeUp Send
Command
BLINK OFF
Shut Down (Off) Battery
Power
1. Panel Shutdown
setting reached
2. Panel Shutdown
button pressed
3. Navigation Wheel
button held
1. Apply External
Power
2. Press and hold
Navigation Wheel
button
OFF OFF External
Power will
transition unit
to Awake
Mode after
boot up
Shut Down (Off) External
Power
N/A Same as Sleep Mode OFF OFF
Shut Down (Off) Charging N/A Same as Sleep Mode OFF OFF