Specifications

Battery Life and Replacement
159
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5”
4. Insert the five screws and replace the rubber feet atop the two upper screws, using the replacement rubber
feet and bottom label included in the Battery Pack Kit (FIG. 5).
5. Restart the device to confirm that the new battery is functioning correctly.
When reassembling the device, take especial care not to pinch, puncture, or damage
the battery. Do not force the rear plate onto the device, as this can damage the
device.
FIG. 84 MVP-5200i back plate installation
Rubber feet
Upper screws
Bottom label
Bottom screw holes
Front of MVP-5200i
Back plate
Bottom screws
Speaker
The three bottom screws are shorter than the top two screws. The screws must be
re-assembled in their original location or the device can be damaged during
reassembly.