Instruction manual
Installation
11
MST-431/MSD-431-L 4.3" Modero S SeriesĀ® Touch Panels
To install the back box:
1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2. For best results, use the MSD-431-L Installation Template (68-2265-01) to ensure proper placement (FIG. 9). The
template is marked to ensure that the touch panel and back box are properly aligned.
3. After ensuring proper placement, cut out the mounting surface for the back box, using the MSD-431-L Installation
Template as a guide.
FIG. 9 MSD-431-L Installation Template
4.45"
2.65"
(6.73 cm)
(11.30 cm)
Using the included template to select the final placement of the back box is highly
recommended. The outside edges of the template are the same dimensions as the
touch panel, which allows you to troubleshoot possible conflicts with wall edges,
doors, and other potential obstacles.
Making sure the actual cutout opening is slightly smaller than the provided
dimensions is highly recommended. This action provides the installer with a margin
for error if the opening needs to be expanded. Too little wall material removed is
always better than too much.