Instruction manual
Installation
10
MST-431/MSD-431-L 4.3" Modero S SeriesĀ® Touch Panels
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the back box to the surface. For thin walls or solid surfaces, use
mounting screws (not included).
FIG. 7 Side view of MSD-431-L
FIG. 8 Side view of MSD-431-L
MSD-431-L
(front)
Back box
Back box knockout
Locking tab
Back box
knockout
Locking tabs
MSD-431-L
(front)
Sleep
Button
Back box
knockout
In order to guarantee a stable installation of the MSD-431-L, the thickness of the wall
material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches
(2.22cm). The mounting surface should also be smooth and flat.
The maximum recommended torque to screw in the locking tabs on the plastic back
box is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the tab screws,
such as with powered screwdrivers, can strip out the locking tabs or damage the
plastic back box.