User guide

60 AMX Series Installer/User Guide
AMIQ-SRL pinouts
The AMIQ-SRL pinouts are provided in the following table.
AMIQ-SRL Pinouts
DB9-F Host Signal Signal Flow SRL Signal
Pin Name/Description Name/Description
1 DCD - Data Carrier Detect Out of SRL DTR - Data Terminal Ready
2 RXD - Receive Data Out of SRL TXD - Transmit Data
3 TXD - Transmit Data In to SRL RXD - Receive Data
4 DTR - Data Terminal Ready In to SRL DSR - Data Set Ready
5 GND - Signal Ground N/A GND - Signal Ground
6 DSR - Data Set Ready Out of SRL DTR - Data Terminal Ready
7 RTS - Request to Send In to SRL CTS - Clear to Send
8 CTS - Clear to Send Out of SRL RTS - Request to Send
9 N/C - Not Connected N/A N/C - Not Connected
Language support
The AMIQ-SRL is designed to operate correctly with all of the keyboard
layouts that are selectable on the AMX5000 and the AMX5010. Once a
keyboard layout in the OSD is selected, the AMIQ-SRL module ensures that
the correct character for the key pressed is passed to the serial device. This is
done automatically and does not require any intervention from the user.