User guide

Appendices 59
Using History mode
History mode allows you to examine the contents of the history buffer, which
contains the events that have occurred.
The AMIQ-SRL maintains a buffer containing 24 x 18 lines of output. When the
history buffer is full, it will add new lines at the bottom of the buffer and delete
the oldest lines at the top of the buffer.
NOTE: The Confi g Key Sequence, On-Line Key Sequence and Clear History Key Sequence
used in the following procedure are the default values. These key combinations can be
changed using the Confi guration Screen.
To use History mode:
1. Press Ctrl-F9. The mode will display as History.
2. Press each key to perform the action described in the following table.
History Mode Control Keys
History Mode Action
Home Move to the top of the buffer.
End Move to the bottom of the buffer.
Page Up Move up one buffer page.
Page Down Move down one buffer page.
Up Arrow Move up one buffer line.
Down Arrow Move down one buffer line.
CTRL-F8 Enters Confi guration mode. The Confi guration Screen will display. Press
Ctrl-F9 to return to the previous screen with History mode enabled or
Ctrl-F10 to return to the previous screen with On-Line mode enabled.
CTRL-F11 Clears the history buffer. If you choose this option, a warning screen will
appear. Press Enter to delete the history buffer or Esc to cancel the action.
The previous screen will redisplay.
3. When fi nished, press Ctrl-F10 to exit History mode and return to
On-Line mode.