User guide

42 AMX Series Installer/User Guide
4. Select your new sequence and click Apply. The selected sequence changes
from blue to black text.
To change the Command Line hotkey sequence:
1. Press Ctrl+Ctrl to launch OSCAR.
2. Click the Console tab.
3. The current Command Line hotkey sequence will be displayed. Click the
double arrow to the right of the Command Line hotkey sequence to scroll
through available options.
4. Select your new sequence and click Apply.
Command Line hotkey sequences
The OSD Command Line enables you to enter a hotkey sequence that you can
use to reset the keyboard and mouse. The default Command Line hotkey
sequence is the NumLock key pressed and held, followed by the Minus (-) key.
You can set the following hotkey sequences from the list available on the
Console tab.
Command Line Hotkey Sequences
Sequence Keystroke Description
NumLock + “-” NumLock key, pressed and held, followed by the Minus (-) key
NumLock + “/” NumLock key, pressed and held, followed by the Slash (/) key
NumLock + “+” NumLock key, pressed and held, followed by the Plus (+) key
NumLock + “*” NumLock key, pressed and held, followed by the Asterisk (*) key
To use Command Line hotkeys:
1. Press the default Command Line hotkey sequence to display the
Command Line.
Command Line
Figure 4.5: Command Line
2. Type rk and press Enter to reset the keyboard.
- or -
Type rm and press Enter to reset the mouse.