User guide

32 AMX Series Installer/User Guide
To set the scan dwell time:
1. Press Ctrl+Ctrl to launch OSCAR.
2. Click the User tab.
Target User Console
OSCAR
Username: 0123456789abcde
Current
Confirm
Apply
New
5 Apply
CancelLog out
Password
Local Scan Dwell Time
[3..99]
Figure 3.5: User Tab
3. In the box provided, enter the local scan dwell time in seconds.
4. Click Apply.
Keyboard Translation
The AMX user station allows you to use PS/2 or Sun keyboards to operate any
type of attached computer. However, when crossing platforms, certain keys
will need to be remapped in order to provide all of the functions available on
the keyboard native to that platform.
For example, if you access a Sun workstation with a PS/2 keyboard, you will
notice that the PS/2 keyboard does not have the Stop and Again keys that are
on a true Sun keyboard. But, by turning Scroll Lock on, the F1 and F2 keys on
the PS/2 keyboard function as the Sun Stop and Again keys. With Scroll Lock
off, F1 and F2 function normally.
The following table shows the translations for a PS/2 keyboard to a Sun
computer. All mapped functions will only be valid when Scroll Lock is on.