User guide

14 AMX Series Installer/User Guide
Figure 2.4: AMX5000 Rack Mounting Diagram
Figure 2.5: AMX5010 Rack Mounting Diagram
To install the rack mounting bracket:
1. Remove the two side screws closest to the front from each side of your
AMX switch.
2. Line up the holes in the brackets with the holes on the sides of the
AMX switch.
3. Using the screws supplied with the rack mounting bracket, thread one
through each of the holes in the sides of the rack mount brackets and into
the AMX switch. Tighten them securely.
4. Install the AMX into your rack using the approved method of your
rack manufacturer.