Instruction manual

Programming
87
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
AUDMIC_EQ_Q
Sets the quality factor (Q) for
the specified microphone
band of the equalizer for the
microphone port.
Sets the quality factor (Q) for the specified microphone band of the equalizer for
the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_Q-<band>,<factor>'"
Variables:
band = 1 to 3 on the microphone inputs
factor = range depends on filter type (set by AUDMIC_EQ_FT)
Bell: range is 0.1 - 20.0
Band Pass:range is 0.1 - 20.0
Band Stop:range is 0.1 - 20.0
High Pass:range is 0.5 - 1.4
Low Pass:range is 0.5 - 1.4
Treble Shelf:range is 0.5 - 1.0
Bass Shelf:range is 0.5 - 1.0
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_Q-1,1'"
Sets the quality factor for the first band of the equalizer for the selected
microphone port (#1 based on D:P:S) to 1.
?AUDMIC_GAIN
Requests the gain of the
microphone.
Requests the gain setting for the microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GAIN'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_GAIN'"
Returns a COMMAND string of the form: AUDMIC_GAIN-<gain>.
AUDMIC_GAIN
Sets the gain for the
microphone port.
Sets the gain of the microphone port addressed by the D:P:S to <gain>.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GAIN-<gain>'"
Variable:
gain = -24 to 24 in dB
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GAIN-3'"
Sets the gain for the microphone port (#1 based on the D:P:S) to 3dB.
?AUDMIC_GATING
Requests the gating setting
for the microphone.
Requests the setting of gating of a microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GATING'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_GATING'"
Returns a COMMAND string of the form: AUDMIC_GATING-<setting>.
AUDMIC_GATING
Sets the gating setting for
the microphone port.
Sets the setting of gating of the microphone port addressed by the D:P:S to
<option>.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GATING-<setting>'"
Variable:
setting = off, low, medium, high, custom
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GATING-low'"
Sets the gating for the microphone port (#1 based on D:P:S) to low.