Instruction manual

Programming
86
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
?AUDMIC_EQ_FT
Requests the filter type of
the specified microphone
band of the equalizer for the
microphone port.
Requests the filter type of the specified microphone band of the equalizer for
the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_FT-<band>'"
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_FT-1'"
Returns a COMMAND string of the form: AUDMIC_EQ_FT-<band>,<value>.
AUDMIC_EQ_FT
Sets the filter type of the
specified microphone band
of the equalizer for the
microphone port.
Set the filter type of any of the specified microphone band of the equalizer for
the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_FT-<band>,<type>'"
Variables:
band = 1..3 on the microphone inputs.
type = bell, band pass, band stop, high pass, low pass, treble shelf, bass shelf
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_EQ_FT-1,band pass'"
Sets the filter type for the first band of the equalizer for the selected microphone
port (#1 based on D:P:S) to band pass.
?AUDMIC_EQ_GAIN
Requests the gain on the
specified microphone band
on the audio output port.
Requests the gain on the microphone equalizer setting of band <band> on the
output audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_GAIN-<band>'"
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_GAIN-1'"
Returns a COMMAND string of the form:
AUDMIC_EQ_GAIN-<band>,<value>.
AUDMIC_EQ_GAIN
Sets the gain on the
specified microphone band
on the audio output port.
Sets the gain on the microphone equalizer band <band> on the output audio
port addressed by the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_GAIN-<band>,<value>'"
Variables:
band = 1..3 on the microphone inputs.
value = -12..12. The units are in dB.
Example:
SEND_COMMAND MIC_1,"'AUDMIC_EQ_GAIN-1,8'"
Sets the gain on microphone band #1 of microphone 1 equalizer to 8.
SEND_COMMAND MIC_2,"'AUDMIC_EQ_GAIN-3,10'"
Sets the gain on microphone band #3 of microphone 2 equalizer to 10.
?AUDMIC_EQ_Q
Requests the quality factor
(Q) for the specified
microphone band of the
equalizer for the microphone
port.
Requests the quality factor (Q) for the specified microphone band of the
equalizer for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_Q-<band>'"
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_Q-1'"
Returns a COMMAND string of the form: AUDMIC_EQ_Q-<band>,<value>.