Instruction manual

Programming
85
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
AUDMIC_DUCK_HOLD
Sets the ducking hold for the
microphone port.
Sets the duration of the hold phase while ducking for the microphone port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_DUCK_HOLD-<hold>'"
Variable:
hold = 0 to 2000
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_DUCK_HOLD-200'"
Sets the ducking hold for the microphone port (#1 based on the D:P:S) to 200.
AUDMIC_DUCK_LEVEL
Sets the ducking level for
the microphone port.
Sets the level while ducking for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_DUCK_LEVEL-<level>'"
Variable:
level = 0 to 20
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_DUCK_LEVEL-4'"
Sets the ducking level for the microphone port (#1 based on the D:P:S) to 4.
AUDMIC_DUCK
_RELEASE
Sets the ducking release for
the microphone port.
Sets the duration of the release phase while ducking from the microphone port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_DUCK_RELEASE-<release>'"
Variable:
release = 10 to 5000
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_DUCK_RELEASE-200'"
Sets the ducking release for the microphone port (#1 based on the D:P:S) to
200.
?AUDMIC_EQ_CF
Requests the frequency for
the specified microphone
band of the equalizer for the
microphone port.
Requests the frequency for the specified microphone band of the equalizer for
the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_CF-<band>'"
Variables:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_EQ_CF-1'"
Returns a COMMAND string of the form: AUDMIC_EQ_CF-<band>,<value>.
AUDMIC_EQ_CF
Sets the frequency for the
specified microphone band
of the equalizer for the
microphone port.
Sets the frequency for the specified microphone band of the equalizer for the
microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_CF-<band>,<frequency>'"
Variables:
band = 1..3 on the microphone inputs.
frequency = 20 to 20,000 in Hz.
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_EQ_CF-1,1000'"
Sets the frequency for the first band of the equalizer for the selected
microphone port (#1 based on D:P:S) to be 1000.