Instruction manual

Audio/Video Configuration
61
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio Settings
The Audio page enables you to set the audio qualities for each audio input, microphone input, amplifier output, and line
output. Any changes you make reflect instantaneously on your source input and output devices.
Audio Out
FIG. 60 displays the Audio Out page for the DVX.
FIG. 60 WebConsole Configuration page - Audio Out tab
1
4
5
9
10
2
3
8
7
6
1 - Analog Output: Select the corresponding option button to select an audio output to adjust. You can only
select one audio output at a time. Click the Track Output 1 check box to track the amp volume for Output 1.
This option is only available for outputs 2 and 3.
2 - Output Volume: Use the sliders to set the output levels for the selected audio output. You can set the
following options for each audio output:
Output Volume: Use the slider to set the volume of the selected audio output. You can set the volume from 0
to 100. The default setting is 20.
Min/Max: Use the sliders to adjust the minimum and maximum volume of the audio output. There are
separate sliders on this option for minimum and maximum volume. You can set the maximum volume from 0
to 100 in increments of 1. The default value is 100. You can set the minimum volume from 0 to 100 in
increments of 1. The default value is 0.
Balance: Use the slider to adjust the balance level of the selected audio output. You can set the balance
level from -20 to +20. The default value is 0. On -T units, this option appears disabled if you select Analog
Output 1.
Sync Delay: Use the slider to set the number of milliseconds to delay the audio. The default value is 32.
Additionally, you can silence the audio output by clicking the Mute check box.
3 - HDMI Output: Use the available options to configure the HDMI output.
HDMI Output: Select the HDMI output for which you want to adjust the audio options.
Audio Source: Select the audio stream to output through the selected HDMI output. You can choose from
Input Pass-thru or any of the available Analog Outputs.
Apply EQ: Click to toggle whether the volume and equalizer for the HDMI source port is active.
4 - S/PDIF Output: Select the audio stream to output through the S/PDIF output. You can choose from any of
the available HDMI or Analog Outputs.