Instruction manual

Audio/Video Configuration
55
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Using a Web Browser
You can access the configuration settings for the DVX by using a web browser. (AMX supports any industry-standard
web browser running Adobe Flash Player 10 or better.) The system configuration pages are available by entering the IP
address of the NetLinx master into the location bar of your web browser. Entering your IP address into your web browser
opens the Main WebControl page (FIG. 56).
Perform these steps to access the configuration settings:
1. Open a web browser.
2. Enter the IP address of the DVX in the location bar of the web browser. (If you do not know your switcher’s IP
address, see the Locating the IP Address of the DVX section on page 56.) The Main WebControl page opens
(FIG. 56).
3. Use the Device options menu at the top of the screen to select the <DEVICE #> - DVX-215xHD-x Switch Device.
(Substitute the model number of your unit for x.) The Enova DVX Setup page opens (FIG. 58).
If a web browser or Flash Player is not available, the DVX's front panel and NetLinx commands provide equivalent
controls for audio/video configuration. See the Using the Front Panel Buttons section on page 45 for more
information.
FIG. 56 Main WebControl page
Device menu
WebControl requires that you install the latest version of the Adobe Flash Player
plug-in for your browser. If your browser does not have the Flash Player plug-in
installed, you will be prompted to install it.