Instruction manual

Audio/Video Configuration
49
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Selecting a Video Test Pattern
Selecting a test pattern for your input source can help determine if the displays are connected correctly. Perform these
steps the select a test pattern:
1. Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2. Press the left and right navigation buttons to select the output on which to display the test pattern (ALL, 1, or 2).
3. Press the down navigational button until the Logo/Test option appears.
4. Use the left and right navigational buttons to select the appropriate output test pattern.
Audio Settings
The following tables list the audio options available on the LCD display by pressing the AUDIO MENU button on the
front panel:
You cannot display a test pattern on the DXLINK output (3) from the front panel
menu. Refer to documentation for the DXLink receiver for information on displaying a
test pattern from the receiver.
Audio Output Menu Options
Audio Output Select Use the left and right navigational buttons to manually select which video output you
want to use. You can choose from 1, 2, 3, or ALL.
Volume Use the left and right navigational buttons to set the volume of the selected audio
output. You can set the volume from 0 to 100. The default setting is 20.
EQ Preset Use the left and right navigational buttons to select a group of preset equalizer
settings. You can choose from Voice, Movie, Music, and Off.
Balance Use the left and right navigational buttons to adjust the balance level of the selected
audio output. You can set the balance level from -20 to +20. The default value is 0.
Format Use the left and right navigational buttons to change the audio format of the selected
audio input. You can set the audio format to Stereo or Mono. The default setting is
Stereo.
Track Output Use the left and right navigational buttons to indicate whether you want to activate
amp volume tracking on the selected audio output. This option tracks the amp volume
for Output 1 and is only available on ports 2 and 3. You can choose from Off or On.
SRC Mix Use the left and right navigational buttons to set the mix level of the audio input source
in the overall mix. You can set the mix level from 0 to -100. The default setting is -100.
Mic1 Mix Use the left and right navigational buttons to set the mix level of microphone 1 in the
overall mix. You can set the mix level from 0 to 100. The default setting is 100.
Mic2 Mix Use the left and right navigational buttons to set the mix level of microphone 2 in the
overall mix. You can set the mix level from 0 to 100. The default setting is 100.
HDMI Use the left and right navigational buttons to indicate which analog audio output to
embed in the selected HDMI output. You can choose from Out1, Out2, Out3, Out4,
Pass-thru, and Off.
HDMI EQ Use the left and right navigational buttons to toggle whether the equalizer settings for
the selected analog output should be applied to the HDMI output. You can choose
from On or Off. The default value is Off.
SPDIF Use the left and right navigational buttons to indicate the audio stream to output
through the S/PDIF output. You can choose from any of the available audio outputs
including the audio on the HDMI outputs.
Max Volume Use the left and right navigational buttons to adjust the maximum volume of the audio
output. You can set the maximum volume from 0 to 100 in increments of 1. The default
value is 100.
Min Volume Use the left and right navigational buttons to adjust the minimum volume of the audio
output. You can set the minimum volume from 0 to 100 in increments of 1. The default
value is 0.
Delay (ms) Use the left and right navigational buttons to set the number of milliseconds to delay
the audio. The default value is 32.