Instruction manual

Wiring and Device Connections

Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide

ID Pushbutton

The ID pushbutton (FIG. 43) sets the NetLinx ID assignments of the Internal Control Device. It has no effect on the

Internal Switcher Device. Only the 5001 ID can be changed. It is not possible to change the 5002 device ID.

LAN (RJ-45)

The LAN RJ-45 port provides 10/100 Mbps communication via Category cable. This is an Auto MDI/MDI-X enabled

port, which allows you to use either straight-through or crossover Ethernet cables.

The LAN port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or

full duplex mode. This communication is reflected via the front ICSP LED.

FIG. 45 provides the pinouts and signals for the LAN connector and cable.

FIG. 46 describes the blink activity for the LAN connector and cable.

FIG. 43 ID Pushbutton

FIG. 44 LAN port

FIG. 45 RJ-45 wiring diagram

FIG. 46 LAN connector / LEDs

ETHERNET

A L

L/A - Activity LED (green)

lights when receiving or

transmitting LAN

data packets

SPD - Link LED (amber) lights when

the LAN cables are connected

and terminated correctly.