Instruction manual

Wiring and Device Connections
21
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
To connect HDMI input source devices (DVI and HDMI) to the HDMI INPUT connectors, the following (optional)
adapter cables are required:
The following table displays the supported video settings for each type of input connection compatible with the HDMI
INPUT connectors:
DXLink INPUTS (5-6)
Two DXLink (RJ-45) connectors (5-6) transport digital video, embedded audio, Ethernet, and bi-directional control over
twisted pair cable to DXLink devices or boards, including digitally transcoded analog video signals. Both inputs support
HDCP. These connectors are only available on the DVX-2155HD-SP.
See the Important Twisted Pair Cabling Requirements and Recommendations section on page 23 for information about
cable requirements for these ports.
DVI Input Adapter Cables
Name Description Length FG#
HDMI Interface
Cable
HDMI Male to HDMI Male 6 1/2’ (2m) FG10-2178-05
HDMI to DVI Cable HDMI Male to DVI Male
(See the HDMI Male to DVI-D Male Cable section on
page 43 for more information on HDMI-to-DVI cable
wiring.)
6’ (1.828m) FG10-2179
Supported Video Settings
Type Phase Shift Hue Saturation Contrast Brightness
DVI X X ü ü ü ü
HDMI X X ü ü ü ü
FIG. 32
DXLINK INPUTS (5-6)