Instruction manual

Wiring and Device Connections
10
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
SWITCH Pushbutton
Press the SWITCH pushbutton (FIG. 9) to access the SWITCH menu on the LCD display. Press this button to switch the
audio, video, or both from any input to any output. Press the TAKE pushbutton to implement the switch.
TAKE Pushbutton
Press the TAKE pushbutton (FIG. 10) to implement an audio/video switch while you are in the Switch menu on the LCD
display. When in an audio or video menu, press the button to cycle through audio and video inputs or outputs (depending
on the menu.) This button does not access the menus or change the currently selected menu.
VIDEO MENU Pushbutton
Press the VIDEO MENU pushbutton (FIG. 11) to access the video options, displayed on the LCD display. There are two
video menus (VIDEO OUTPUT and VIDEO INPUT) and both are accessible by using this button. Multiple presses
cycle through the various VIDEO menus.
The Video menu enables you to see and adjust most parameters of the video input and output signals.
Use the UP and DOWN navigational buttons to traverse the various configuration parameters.
Use the LEFT and RIGHT navigational buttons to adjust the selected video parameter.
Adjustments take effect immediately (some parameter changes may exhibit a slight delay) and are saved when you
advance to another option or exit the menu. The menu exits automatically after no user interaction on the front panel for
30 seconds.
See the Video Settings section on page 46 for a listing of all available options and instructions on how to change the
settings.
FIG. 9 SWITCH pushbutton
FIG. 10 TAKE pushbutton
FIG. 11 VIDEO MENU button