Instruction manual

Overview
4
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
DVX-2150HD/DVX-2155HD/DVX-2110HD Specifications (Cont.)
AxLink Port: 1 3.5 mm 4-pin captive-wire connector provides data and power to external control
devices. The AxLink LED (green) indicates the state of the AxLink port. The AxLink port
can be used to supply power to downstream AxLink-compatible devices as long as the
maximum current draw is less than 1 Amp.
Note: The AxLink port provides only limited power to connected AxLink devices. It is
recommended to use an alternate power source when connecting AxLink devices to the
DVX-2150HD-SP.
Note: When using the DVX-2150HD-SP with the NXA-PDU-1508-8 power distribution unit,
do NOT connect +12V power from any of the NXA-PDU's AxLink ports to the AxLink power
pin.
See the AxLink Port and LED (4-pin captive-wire) section on page 30 for more information.
Power Connector: IEC Power cord connector: 100-240V AC, 47-63Hz
Operating Environment: • Storage temperature: -10º C to 70º C (14º F to 158º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
Supported Video
Resolutions:
HD resolutions up to 1080p and VGA resolutions up to 1920x1200@60Hz. Higher
resolutions are supported in pass-through mode. See the Available Pixel Display and
Refresh Rates section on page 117 for a complete listing of all supported video
resolutions.
Dimensions (HWD): 5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
Weight: 29.2 lb (13.25 kg)
Enclosure: Metal with black matte finish
Certifications: • FCC Part 15 Class A
• IC CISPR 22 Class A
• C-Tick CISPR 22 Class A
• CE EN 55022 Class A and EN 55024
• LVD EN 60950-1
• IEC 60950-1
• cULus UL 60950-1
Included Accessories: • 1 Power Cord, Universal (64-0009)
• 2 Connector, Phoenix2, M, TH, R/A, BLACK, 5.08mm (41-0158-SA)
• 4 Connector, Phoenix5, F, BLACK (41-0336)
• 2 Connector, Phoenix3, F, BLACK (41-0338)
• 1 Commoning Strip, Cypher, 8 Pos., 3.5 mm, Phoenix Connector (41-2105-01)
• 1 Connector, Phoenix4, F, TH, BLACK, 3.5mm (41-5047)
• 2 Connector, Phoenix, 8-pin, FEM, BLACK (41-5083)
• 1 Connector, Phoenix, 6-pin, FEM, BLACK (41-5063)
• 2 Front Rack Mounting Brackets (62-1905-16 and 62-1905-17)
• 8 Screw, #8-32 x .375, PFH, Undercut, BLACK (80-0145)
• 2 CC-NIRC, IR Emitter with 3.5mm Phoenix Connector (FG10-000-11)
• 1 CC-DVIM-VGAF, DVI to HD-15 Female Adapter (FG10-2170-13)
Optional Accessories: • CC-DVI-5BNCM DVI to 5 BNC adapter cable (FG10-2170-08)
• CC-DVI-RCA3M DVI to 3 Male RCA adapter cable for component and composite
connections (FG10-2170-09)
• CC-DVI-SVID DVI to S-Video adapter cable (FG10-2170-10)
• CC-DVIM-VGAF DVI to HD15 female adapter cable (FG10-2170-13)
• CC-3.5ST5-RCA2F 2 RCA Female to 5-Pin Phoenix Cable (FG10-003-20)
• AVB-RX-DXLINK-HDMI DXLink™ HDMI Receiver Module (FG1010-500)
The following accessories are only optional for the DVX-2155HD:
• AVB-TX-MULTI-DXLINK DXLink Multi-Format Transmitters (FG1010-310)
• AVB-WP-TX-MULTI-DXLINK DXLink Multi-Format Wallplate Transmitters
(FG1010-320-BL/WH)