Instruction manual
Overview
1
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Overview
The Enova DVX-2150HD-SP (FG1905-11), DVX-2150HD-T (FG1905-13), DVX-2155HD-SP (FG1905-12),
DVX-2155HD-T (FG1905-14), DVX-2110HD-SP (FG1905-07), and DVX-2110HD-T (FG1905-09). All-In-One
Presentation Switchers combine all of the components you need to control/automate any environment into a simple,
flexible, comprehensive solution including control, analog and digital audio/video inputs, audio and video switching,
video scaling, local and remote distribution, plus audio mixing, and amplification - all in a single box (FIG. 1).
Common Application
The DVX-2150HD, DVX-2155HD, and DVX-2110HD are ideal solutions when used to simplify A/V control and
distribution in sophisticated presentation environments and conference rooms, including those supporting audio and
video conferencing. They also fits well in classrooms and auditoriums that need multiple displays, or video previewing.
Audio Processing
The DVX-2150HD, DVX-2155HD, and DVX-2110HD feature built-in audio mixing and amplification that outputs two
channels at 25 Watts each into 8-ohms after passing through a mixer and an integrated equalizer to accommodate the
size, furnishings, surfaces, and functional requirements in every room. There are also three stereo line level outputs each
with its own mixing and equalization settings.
Integrated Control
The DVX-2150HD, DVX-2155HD, and DVX-2110HD include the equivalent of a NetLinx 2100 central controller.
Each unit also includes a front control panel for an added level of convenience. The DVX features standard RS-232, IR,
digital I/O, and relay control ports for control over environment and third-party equipment.
DVX-2150HD/DVX-2155HD/DVX-2110HD Specifications
FIG. 1 Enova DVX-2150HD-SP
DVX-2150HD/DVX-2155HD/DVX-2110HD Specifications
Power: 100-240V, 47/63 Hz AC supply
Power Consumption: • 80 Watts typical without amplifier
• 85 to 90 Watts typical average with amplifier
• 30 Watts typical in low-power mode
Memory: • 256 MB SDRAM
• 1 MB Non-volatile RAM (NVRAM)
•4 GB Flash
Amplifier: • 2 x 25W into 8 Ohms Class D stereo amplifier (capable of driving loads in the range of
2-8 ohms) (-SP models only)
• 70V or 100V at 75W amplified variable mono audio (-T models only)
Integrated Controller: Equivalent of a NetLinx 3101-SIG central controller on-board.