Instruction manual

Programming
89
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
?AUDMIC_GATING
_RELEASE
Requests the release phase
while gating for the
microphone port.
Requests the duration of the release phase while gating from the microphone
port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GATING_RELEASE'"
Example:
SEND_COMMAND MIC_1, "'?AUDMIC_GATING_RELEASE'"
Returns a string of the form: ?AUDMIC_GATING_RELEASE=<value>.
AUDMIC_GATING
_RELEASE
Sets the gating release for
the microphone port.
Sets the duration of the release phase while gating from the microphone port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GATING_RELEASE-<release>'"
Variable:
release = 10 to 5000
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GATING_RELEASE-200'"
Sets the gating release for the microphone port (#1 based on the D:P:S) to 200.
?AUDMIC_GATING
_THRESH
Requests the gating
threshold for the microphone
port.
Requests the threshold setting while gating from the microphone port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_GATING_THRESH'"
Example:
SEND_COMMAND MIC_1, "'?AUDMIC_GATING_THRESH'"
Returns a string of the form: ?AUDMIC_GATING_THRESH=<value>.
AUDMIC_GATING
_THRESH
Sets the gating threshold for
the microphone port.
Sets the threshold while gating for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_GATING_THRESH-<thresh>'"
Variable:
thresh = 0 to -60
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_GATING_THRESH--20'"
Sets the gating threshold for the microphone port (#1 based on the D:P:S) to
-20.
?AUDMIC_LIMITER
Requests the limiter setting
for a microphone.
Requests the setting of the limiter of a microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_LIMITER'"
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_LIMITER'"
Returns a COMMAND string of the form: AUDMIC_LIMITER-<setting>.
AUDMIC_LIMITER
Turns on or turns off the
limiter function on the
microphone.
Enables or Disables whether the microphone addressed by D:P:S has the
Limiter functionality turned on.
Syntax:
SEND_COMMAND <DEV>,"'AUDMIC_LIMITER-<setting>'"
Variable:
setting = off, low, medium, high, custom
Example:
SEND_COMMAND MIC_1,"'AUDMIC_LIMITER-off'"
Turns off the limiter for the microphone port (#1 based on D:P:S).