Touch Panels Operation/Reference Guide

Setup Pages and Descriptions

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Panel Information Page

The Panel Information page (FIG. 38) centers around Modero panel properties that include resolution

used, on-board memory, firmware, address/channel information, and string information.

The elements of the Panel Information page are as follows:

Project Information Page Elements (Cont.)

Revision Date: Displays the last revision date for the project.

Last Save Date: Displays the last date the project was saved.

Blink Rate: Displays the feedback blink rate (10th of second).

Job Comments: Displays any comments associated to the job. These comments are taken from

the TPD4 project file.

FIG. 38

Panel Information page

Panel Information Page Elements

Back: Returns to the previously active touch panel page.

Connection Status icon: This visual display of the connection status allows the user to have a current

visual update of the panel’s connection status, regardless of what page is

currently active.

• A Lock only appears on the icon if the panel has established a connection

with a currently secured target Master requiring a username and password.

Panel Type: Displays the model of the Modero panel being used.

Firmware Version: Displays the G4 firmware version being used by the panel.

• Verify that the panel has the latest version from www.amx.com.

Setup Port: Displays the setup port information/value being used by the panel.

High Port: Displays the high port (port count) value for the panel.

High Address: Displays the high address (address count) value for the panel.

High Channel: Displays the high channel (channel count) value for the panel.

High Level: Displays the high level (level count) value being used by the panel.

Serial Number: Displays the specific serial number value assigned to the panel.

Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.

Screen Width: Displays the pixel width being used to display the incoming video signal on the

Modero panel.

• The maximum available screen width on a NXD-500i panel is 800 pixels.

Screen Height: Displays the pixel height being used to display the incoming video signal on the

Modero panel.

• The maximum available screen height on a NXD-500i panel is 480 pixels.

This information is retrieved

from the Modero panel