Corporation Home Security System Operation/Reference Guide

Using the NetLinx Module
66
Metreau Entry Communicators
Setting the Intercom Session Timeout
When only 30 seconds are left in your call, the panel provides a popup to extend the call (FIG. 48).
1. Select the Setup button on your intercom page.
2. Press the up or down arrows to increment the timeout up by 1 second in each direction. If your call
exceeds your session timeout the panel provides you with a popup (FIG. 48) to extend the session.
3. Press Exit when you are finished.
The session timeout can be disabled by setting the time to 0 (zero). If both panels have a timeout of 0,
then the call must be manually terminated.
Setting Intercom Auto Answer
1.
Select the Setup button on your intercom page.
2. Press the button beneath Auto-Answer to toggle the option. The button indicates its current state.
3. Press Exit when you are finished.
Session time-outs are not applicable for calls with Metreau Entry Communicators.
FIG. 48 Extend Call Popup