Corporation Home Security System Operation/Reference Guide

Using the NetLinx Module
65
Metreau Entry Communicators
Using the NetLinx Module
Overview
Metreau Entry Communicators can be controlled via the Touch Pages provided with the NetLinx
Module, as described in this section. Refer to the NetLinx module documentation for details on
incorporating the module into your source code and loading it onto the NetLinx Master.
The Door (doorbell) functionality required by Metreau Entry Communicators is contained within the
NetLinx Module, which also contains Intercom functionality required for the Door functions.
Incorporating an Intercom Panel Into Your NetLinx System
Download the module for the intercom panel from www.amx.com, and include it in your NetLinx
project file. For searching purposes, the module manufacturer is AMX and the model is Intercom.
Panel Intercom Configuration
Intercom Setup
The Intercom Setup page (FIG. 47) allows you to set the session timeout for intercom calls, toggle
intercom auto-answer on and off, and provides access to the Door Setup and Advanced Setup pages.
The module used by the Metreau Entry Communicators is the AMX intercom module
(the same module used by other intercom-capable AMX touch panels), updated to
support communicators.
The intercom module will only work with AMX intercom capable panels.
FIG. 47 Intercom Setup Page